https://www.dscpower.com/power-supply-blog-page daily 0.75 2025-04-30 https://www.dscpower.com/power-supply-blog-page/custom-2400-watt-navy-shipboard-power-supply-ptddm monthly 0.5 2026-04-03 https://www.dscpower.com/power-supply-blog-page/custom-2000-watt-mil-std-901-navy-power-supply monthly 0.5 2025-04-30 https://www.dscpower.com/power-supply-blog-page/do-160-wide-frequency-range-350-watt-aircraft-power-supply monthly 0.5 2021-12-22 https://www.dscpower.com/power-supply-blog-page/custom-1500-watt-military-power-supply monthly 0.5 2021-12-22 https://www.dscpower.com/power-supply-blog-page/hot-swap-2u-atx-power-supply-rack-system monthly 0.5 2025-05-29 https://www.dscpower.com/power-supply-blog-page/custom-ip67-industrial-power-supply monthly 0.5 2021-06-02 https://www.dscpower.com/power-supply-blog-page/custom-areospace-power-supply-for-military-aircraft monthly 0.5 2021-03-18 https://www.dscpower.com/power-supply-blog-page/semi-custom-do-160-wide-frequency-range-aircraft-power-supply monthly 0.5 2021-03-18 https://www.dscpower.com/power-supply-blog-page/military-power-supply-for-uhf-military-radio-flztk monthly 0.5 2021-03-18 https://www.dscpower.com/power-supply-blog-page/military-power-supply-for-uhf-military-radio monthly 0.5 2021-03-18 https://www.dscpower.com/power-supply-blog-page/industrial-power-supply-300-watt-open-frame monthly 0.5 2021-03-18 https://www.dscpower.com/power-supply-blog-page/270-vdc-input-500-watt-dc-dc-converter monthly 0.5 2021-03-18 https://www.dscpower.com/power-supply-blog-page/dc-input-atx-blade-power-supply monthly 0.5 2021-03-18 https://www.dscpower.com/power-supply-blog-page/dual-input-150-watt-mil-grade-power-supply monthly 0.5 2021-03-18 https://www.dscpower.com/power-supply-blog-page/do160-1000-watt-aviationg-rade-power-supply monthly 0.5 2021-03-16 https://www.dscpower.com/power-supply-blog-page/tag/2400+Watt+MIL-STD-901+Power+Supply monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/High+Temp+Power+Supply+for+Industrial+Use monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/Aviation+Grade+DO-160+Wide+Frequency+Range+Power+Supply monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/High+Temperature+Industrial+Power+Supply monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/Custom+Military+Power+Supply+1500+Watts monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/Semi-Custom+DO-160+Wide+Frequency+Range+Aircraft+Power+Supply monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/Custom+2400+Watt+Navy+Shipboard+Power+Supply monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/MIL-STD-901+Compliant+Power+Supply monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/ATX+Power+Supply+with+DC+Input monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/PS2+Hot+Swap+Redundant+Power+Supply monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/2000+Watt+901+Power+Supply monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/Military+Grade+DC+Input+Power+Supply monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/Redundant+2U+Hot+Swap+ATX+Power+Supply+System monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/DO-160+1000+Watt+Aviation+Grade+Power+Supply monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/Custom+IP65+Industrial+Power+Supply monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/Military+Power+Supply+for+Dual+Use monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/Military+Power+Supply+with+Dual+Input monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/Military+DC+to+DC+Converter+with+270VDC+Input monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/270VDC+Input+Military+Power+Supply monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/150+Watt+DC+Input+ATX+Power+Supply monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/270VDC+Input+Military+DC+to+DC+Converter monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/2400+Watt+Mil-Spec+Navy+Power+Supply monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/Semi-Custom+Aircraft+Grade+DO-160+Wide+Frequency+Range+Power+Supply monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/Military+Power+Supply+for+UHF+Military+Radio monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/Military+Grade+1000+Watt+Power+Supply monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/DO-160+Wide+Frequency+Range+Aircraft+Power+Supply monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/DO-160+Aviation+Grade+1000+Watt+Power+Supply monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/PS2+Hot+Swap+ATX+Power+Supply monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/DC+Input+ATX+Power+Supply monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/Dual+Input+Military+Grade+Power+Supply monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/Dual+Input+Industrial+Control+Power+Supply monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/IP65+Rated+Power+Supply monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/Semi-Custom+Aviation+Grade+DO-160+Wide+Frequency+Range+Power+Supply monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/Hot+Swap+2U+ATX+Power+Supply+Rack+System monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/Industrial+Grade+Power+Supply monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/Custom+Designed+Military+Power+Supply monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/ATX+Blade+Power+Supply+DC+Input monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/Custom+Power+Supply+for+Military+Aircraft monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/Aircraft+Grade+350+Watt+DO-160+Wide+Frequency+Range+Power+Supply monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/350+Watt+DO-160+Wide+Frequency+Range+Aircraft+Power+Supply monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/1000+Watt+Military+Grade+Power+Supply monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/Dual+Input+Power+Supply+for+Industrial+Use monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/Custom+1500+Watt+Military+Power+Supply monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/ABD0100+Airbus+Power+Supply monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/Custom+Military-Grade+1500+Watt+Power+Supply monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/Airbus+ABS0100+Power+Supply monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/Hot+Swap+Industrial+ATX+Power+Supplies monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/IP67+Rated+Power+Supply monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/Custom+2400+Watt+Military+Power+Supply monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/Custom+IP67+Industrial+Power+Supply monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/Military+Radio+Power+Supply monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/400Hz+Military+Power+Supply+for+Aircraft monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/150+Watt+Dual+Input+Military+Power+Supply monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/Custom+2000+Watt+Navy+Power+Supply monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/Industrial+Power+Supply monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/Industrial+Control+Power+Supply+with+Dual+Input monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/400Hz+Custom+Aircraft+Power+Supply+for+Military+Aerospace+Application monthly 0.5 https://www.dscpower.com/power-supply-blog-page/tag/Custom+Aerospace+Power+Supply+for+Military+Aircraft monthly 0.5 https://www.dscpower.com/do-160-aviation-power-supplies daily 0.75 2026-03-25 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/b796987c-9451-4c29-8215-90412690e68c/DO-160-Power-Supply-50-Watt-Single-Phase-AGPS-Series.jpg DO-160 Aviation Power Supplies - 50 Watt - DO-160 Product Features: For RTCA/DO-160 Applications Operating Temp Range: -40º to +85ºC Input: 90-264Vac, Single Phase Conduction Cooled https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/f4f7f23b-f912-4070-b28d-d74a8f54ea48/DO-160-Power-Supply-100-Watt-Single-Phase-AGPS-Series.jpg DO-160 Aviation Power Supplies - 100 Watt - DO-160 Product Features: For RTCA/DO-160 Applications Operating Temp Range: -40º to +85ºC Input: 90-264Vac, Single Phase Conduction Cooled https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/fb6d4296-6e65-4bc5-bbf8-e70be16d500d/DO-160-Power-Supply-300-Watt-Single-Phase-AGPS-Series.jpg DO-160 Aviation Power Supplies - 300 Watt - DO-160 Product Features: For RTCA/DO-160 Applications Operating Temp Range: -40º to +85ºC Input: 90-264Vac, Single Phase Conduction Cooled https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/b20629c3-de82-4927-b0c7-eda1308b2f19/DO-160-Power-Supply-500-Watt-Single-Phase-AGPS-Series.jpg DO-160 Aviation Power Supplies - 500 Watt - DO-160 Product Features: For RTCA/DO-160 Applications Operating Temp Range: -40º to +85ºC Input: 90-264Vac, Single Phase Conduction Cooled https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/16dc41af-4ebe-48d0-9632-e7897314f398/DO-160-Power-Supply-1000-Watt-Single-Phase-AGPS-Series.jpg DO-160 Aviation Power Supplies - 1000 Watt - DO-160 Product Features: For RTCA/DO-160 Applications Operating Temp Range: -40º to +85ºC Input: 90-264Vac, Single Phase Conduction Cooled https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/9adad357-469a-40e2-9262-544c2243c2fa/DO-160-Power-Supply-1200-Watt-Single-Phase-AGPS-Series.jpg DO-160 Aviation Power Supplies - 1200 Watt - DO-160 Product Features: For RTCA/DO-160 Applications Operating Temp Range: -40º to +85ºC Input: 90-264Vac, Single Phase Conduction Cooled https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/8d968047-3143-4204-a218-29e1300e5c3d/DO-160-Power-Supply-1400-Watt-Three-Phase-AGPS-Series.jpg DO-160 Aviation Power Supplies - 1400 Watt - DO-160 Product Features: For RTCA/DO-160 Applications Operating Temp Range: -40º to +85ºC Input: 90-264Vac, Three Phase Conduction Cooled https://www.dscpower.com/home daily 1.0 2026-03-25 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/279844c8-fbbe-4a6c-a832-fd98578a15c4/Aerospace-Power-Supply-Three-Phase-400Hz.jpg https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/02becd0a-0685-44b2-8c73-7e79cabcd198/Industrial-Grade-Power-Supply-IP67-Ingress.jpg https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/f19fff46-82aa-4921-8d9c-c666fc0784e3/Military-Grade-Power-Supply-Single-Phase-MGPS-Series.jpg https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/679bb312-0cbe-49fe-a621-13e569986507/ATX-Industrial-Computer-Power-Supply.jpg https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/bf3928d3-35c6-463b-a660-fb942fe3b351/Hot-Swap-Redundant-Power-Supply-Rack-System.jpg https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/1600371418075-6I7G7PAM70LA63IRG2VL/Semi-Custom_Modified_Standard_Power_Supply.jpg https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/332cedf0-ac24-402b-b7c5-b79393aa56a4/Commercial-Aviation-DO160-Power-Supply+.JPG DSC Power Solutions Homepage Commercial Aviation - DO-160 Grade Power Supplies Designed for RTCA/DO-160 Applications Operating Temp: -40º to +85ºC Input: 90 to 264Vac Phase: Single & 3-Phase Frequency Options: 400Hz & 800Hz Conduction Cooled, Baseplate Mounting https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/a08abccc-b13c-4d20-81f1-07df95fc6db1/Military-DC-to-DC-Converter.jpg DSC Power Solutions Homepage Military DC-DC Converter - MIL-STD Designed for MIL-STD-461/704/810/1275 Input: 24V/48Vdc Operating Temp: -40º to +85ºC Isolated, Single & Multiple Outputs Conduction Cooled, Baseplate Mountig Custom Modifications Available https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/1ec86013-5ce6-497c-8e91-e50ebaaf1812/Custom-Designed-Power-Supply.jpg DSC Power Solutions Homepage Full Custom Designs Complete Turnkey Design Build to Spec or Build to Print Custom Mechanical Enclosures Conduction, Convection or Liquid Cooling Special Input or Output Voltages Low, Medium or High Volume https://www.dscpower.com/mgps-1p-500-watt-military-power-supply daily 0.75 2025-07-14 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/055e5f0a-f963-4986-aa7d-319d8f3ebf24/MGPS500-1P-XX-Single-Output-Military-Grade-Power-Supply.jpg MGPS-1P 500 Watt Military Power Supply - MGPS500-1P-XX: 500 Watt, Single Output, Military Grade Power Supply - Product Specification Product Description This product is a 500 watt, single output, military grade power supply designed for electronic systems operating in harsh environments under adverse temperature conditions. It is intended for a single phase, AC power source and designed to meet applicable military standards for airborne, ground and shipboard applications. Product Features Meets MIL-STD-461/704/810/1399 Wide Frequency Range: 47 to 440Hz Operating Temperature Range: -40º to +85ºC Conduction Cooled, Baseplate Mounting AC Input Voltage Input Range: 90-264Vac (115/208/230VAC nominal input) Frequency Range: 47-440Hz (50/60/400Hz nominal) Phase: Single Phase, 2 wire plus ground Power Factor Correction: 0.95 min @ 115Vac, full load. Designed to meet MIL-STD-1399, Section 300A (60Hz) Input Transient Protection: Designed to meet MIL-STD-704A/D (80Vdc for 100mSec) Input Surge Protection: Designed to meet MIL-STD-1275A/D (100Vdc for 50mSec) Output Selection Guide Single Output Voltages: 12Vdc, 24Vdc, 28Vdc, & 48Vdc (Custom output voltages are available, consult factory) DC Output Characteristics (floating) Output Power: 500 watts (maximum continuous power, may require derating for some low voltage outputs) Line Regulation: ±2.0% Typical Load Regulation: ±2.0% Typical (No load to full load; nominal input) Output Ripple/Noise: 1% Typical (pk-pk; nominal input; full load; 20MHz bandwidth) Set Point Accuracy: ±1.0% of Output Voltage (Nominal input; full load; 25°C) Transient Response: Output voltage returns to within 1% in less than 2.5mS for a 50% load change and the peak transient does not excess 5% Overshoot: Turn-on and turn-off overshoot should not exceed 5% over nominal voltage Electrical Characteristics Switching Frequency: 250KHz Fixed Efficiency: 88% Typical (Measuring at 115Vac and at full load) Turn On Delay: 250 to 500mS (To nominal output voltage) Isolation Voltage: Input to Output: 3000VAC Input to Chassis: 1500VAC (30 seconds) Output to Chassis: 500Vdc Isolation Resistance: 100Mohms (Input to output) Temperature Regulation: +/- 0.005%/degree C (+/- 2% Maximum over operating temp range) Protection Over Current Limit: 115 to 130%. Auto-recovery after removal of overload condition Over-Voltage Setpoint: 108 to 125% of output voltage. Unit latched 1 minute, recycle AC input to reset Short Circuit: Auto-recovery after short circuit condition is removed Over Temperature Protection: The power supply is protected for over temperature conditions with thermal shutdown. Auto-Recovery when temperature returns to normal Environmental Operating Temperature: -40º to +85ºC (baseplate) Storage Temperature: -50º to +100ºC Operating Humidity: 10% to 95%, non-condensing Storage Humidity: 5% to 95%, non-condensing Operating Altitude: Sea-level to 15,000 ft. max Shock & Vibration: Designed to meet MIL-STD-810G EMC Radiated & Conducted EMI: Designed to meet MIL-STD-461F Cooling Conduction Cooling: Baseplate not to exceed +85ºC for full rated output Mechanical Enclosure: Metal chassis, aluminum baseplate and enclosure, gold finish Outline Dimensions: 2.6” X 5.0" X 8.0"" (H X W X L) – excluding I/O connectors Weight: 5.0 lbs. AC Input Connector: D38999 or EQ. DC Output Connector: D38999 or EQ. Optional Features, Controls or Alarms Consult factory Note Product specifications subject to change without notice https://www.dscpower.com/military-power-supplies daily 0.75 2026-03-16 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/0acaabc9-9743-405a-9e80-79c949d6c07f/500-Watt-Single-Phase-Series-MGPS-Military-Power-Supply.jpg Military Power Supplies - 500 Watt - Mil-Grade Product Features: Designed for MIL-STD-461/810/1399 Operating Temp Range: -40º to +85ºC Input: 90-264Vac, Single Phase Conduction Cooled https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/91153077-4eec-412b-acac-5fd9136324bb/1000-Watt-Single-Phase-MGPS-Seires-Military-Power-Supply.jpg Military Power Supplies - 1000 Watt - Mil-Grade Products Features: Designed for MIL-STD-461/810/1399 Operating Temp Range: -40º to +85ºC Input: 90-264Vac, Single Phase Conduction Cooled https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/f0215baa-e7f4-4c38-b986-c501ca3a9319/1200-Watt-Single-Phase-MGPS-Seires-Military-Power-Supply.jpg Military Power Supplies - 1200 Watt - Mil-Grade Products Features: Designed for MIL-STD-461/810/1399 Operating Temp Range: -40º to +85ºC Input: 90-264Vac, Single Phase Conduction Cooled https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/91b5bc45-3cac-45dc-bb25-23beddb69e3d/1400-Watt-Single-Phase-MGPS-Seires-Military-Power-Supply.jpg Military Power Supplies - 1400 Watt - Mil-Grade Product Features: Designed for MIL-STD-461/810/1399 Operating Temp Range: -40º to +85ºC Input: 90-264Vac, Single Phase Conduction Cooled https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/2eedb982-f4eb-49b1-9b0b-a64d0cad4b80/2000-Watt-Single-Phase-Series-MGPS-Military-Power-Supply.jpg Military Power Supplies - 2000 Watt - Mil-Grade Product Features: Designed for MIL-STD-461/810/1399 Operating Temp Range: -40º to +85ºC Input: 90-264Vac, Single Phase Conduction Cooled https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/af6621f2-71fa-42ac-b2a8-45dad0c6843b/2400-Watt-Single-Phase-Series-MGPS-Military-Power-Supply.jpg Military Power Supplies - 2400 Watt - Mil-Grade Product Features: Designed for MIL-STD-461/810/1399 Operating Temp Range: -40º to +85ºC Input: 90-264Vac, Single Phase Conduction Cooled https://www.dscpower.com/contact daily 0.75 2020-12-14 https://www.dscpower.com/aerospace-power-supplies daily 0.75 2026-03-24 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/4c903024-e9b3-43cf-b52c-816b7b179f56/Aerospace-Power-Supply-500-Watt-Three-Phase-MGPS-Series.jpg Aerospace Power Supplies - 500 Watt - Aerospace Product Features: Designed for MIL-STD-704/461/810 Input: 115Vac, 3-Phase, 400Hz Operating Temp Range: -40º to +85ºC Conduction Cooled https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/6fd483f2-e98c-488a-8a64-24d36cf5389e/Aerospace-Power-Supply-1000-Watt-Three-Phase-MGPS-Series.jpg Aerospace Power Supplies - 1000 Watt - Aerospace Product Features: Designed for MIL-STD-704/461/810 Input: 115Vac, 3-Phase, 400Hz Operating Temp Range: -40º to +85ºC Conduction Cooled https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/14935b27-c1f9-46e0-95c6-e7189a9c7169/Aerospace-Power-Supply-1200-Watt-Three-Phase-MGPS-Series.jpg Aerospace Power Supplies - 1200 Watt - Aerospace Product Features: Designed for MIL-STD-704/461/810 Input: 115Vac, 3-Phase, 400Hz Operating Temp Range: -40º to +85ºC Conduction Cooled https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/67f19896-df63-46ec-9c57-8b59ffc68257/Aerospace-Power-Supply-1400-Watt-Three-Phase-MGPS-Series.jpg Aerospace Power Supplies - 1400 Watt - Aerospace Product Features: Designed for MIL-STD-704/461/810 Input: 115Vac, 3-Phase, 400Hz Operating Temp Range: -40º to +85ºC Conduction Cooled https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/55d560b8-8e96-4e34-b281-7ee775dc6c12/Aerospace-Power-Supply-2000-Watt-Three-Phase-MGPS-Series.jpg Aerospace Power Supplies - 2000 Watt - Aerospace Product Features: Designed for MIL-STD-704/461/810 Input Voltage: 115Vac, 3-Phase, 400Hz Operating Temp Range: -40º to +85ºC Conduction Cooled https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/2cc8a391-8f2e-4237-9eb6-c2453614729c/Aerospace-Power-Supply-2400-Watt-Three-Phase-MGPS-Series.jpg Aerospace Power Supplies - 2400 Watt - Aerospace Product Features: Designed for MIL-STD-704/461/810 Input Voltage: 115Vac, 3-Phase, 400Hz Operating Temp Range: -40º to +85ºC Conduction Cooled https://www.dscpower.com/about daily 0.75 2021-04-28 https://www.dscpower.com/mgps-1p-1400-watt-military-power-supply daily 0.75 2025-08-07 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/e373ef22-4441-4c8e-bf04-96eada08187a/MGPS1400-1P-XX-Single-Phase-Series-Military-Grade-Power-Supply.jpg MGPS-1P 1400 Watt Military Power Supply - MGPS14 00-1P-XX: Single Phase, Military Grade, Power Supply Product Specification Product Description This product is a 1400 watt, single output, military grade power supply designed for electronic systems operating in harsh environments under adverse temperature conditions. It is intended for a single phase, AC power source and designed to meet applicable military standards for airborne, ground and shipboard applications. Product Features Meets MIL-STD-461/704/810/1399 Wide Frequency Range: 47 to 440Hz Operating Temperature Range: -40º to +85ºC Conduction Cooled, Baseplate Mounting AC Input Voltage Input Range: 90-264Vac 85 – 264VAC (115/208/230VAC nominal input) Frequency Range: 47-440Hz (50/60/400Hz nominal) Phase: Single Phase, 2 wire plus ground Power Factor Correction: 0.95 min @ 115Vac, full load. Designed to meet MIL-STD-1399, Section 300A (60Hz) Input Transient Protection: Designed to meet MIL-STD-704A/D (80Vdc for 100mSec) Input Surge Protection: Designed to meet MIL-STD-1275A/D (100Vdc for 50mSec) Output Selection Guide Single Output Voltages: 12Vdc, 24Vdc, 28Vdc, & 48Vdc (Custom output voltages are available, consult factory) DC Output Characteristics (floating) Output Power: 1400 watts (maximum continuous power, may require derating for some low voltage outputs) Line Regulation: ±2.0% Typical Load Regulation: ±2.0% Typical (No load to full load; nominal input) Output Ripple/Noise: 1% Typical (pk-pk; nominal input; full load; 20MHz bandwidth) Set Point Accuracy: ±1.0% of Output Voltage (Nominal input; full load; 25°C) Transient Response: Output voltage returns to within 1% in less than 2.5mS for a 50% load change and the peak transient does not excess 5% Overshoot: Turn-on and turn-off overshoot should not exceed 5% over nominal voltage Electrical Characteristics Switching Frequency: 250KHz Fixed Efficiency: 88% Typical (Measuring at 115Vac and at full load) Turn On Delay: 250 to 500mS (To nominal output voltage) Isolation Voltage: Input to Output: 3000VAC Input to Chassis: 1500VAC (30 seconds) Output to Chassis: 500Vdc Isolation Resistance: 100Mohms (Input to output) Temperature Regulation: +/- 0.005%/degree C (+/- 2% Maximum over operating temp range) Protection Over Current Limit: 115 to 130%. Auto-recovery after removal of overload condition Over-Voltage Setpoint: 108 to 125% of output voltage. Unit latched 1 minute, recycle AC input to reset Short Circuit: Auto-recovery after short circuit condition is removed Over Temperature Protection: The power supply is protected for over temperature conditions with thermal shutdown. Auto-Recovery when temperature returns to normal Environmental Operating Temperature: -40º to +85ºC (baseplate) Storage Temperature: -50º to +100ºC Operating Humidity: 10% to 90%, non-condensing Storage Humidity: 5% to 95%, non-condensing Operating Altitude: Sea-level to 15,000 ft. max Shock & Vibration: Designed to meet MIL-STD-810G EMC Radiated & Conducted EMI: Designed to meet MIL-STD-461F Cooling Conduction Cooling: Baseplate not to exceed +85ºC for full rated output Mechanical Enclosure: Metal chassis, aluminum baseplate and enclosure, gold finish Outline Dimensions: 2.5” X 7.5" X 11.0" (H X W X L) – excluding I/O connectors Weight: 7.5 lbs. AC Input Connector: D38999/20WC04PN DC Output Connector: D38999/20WE6SN. Optional Features, Controls or Alarms Consult factory Note Product specifications subject to change without notice https://www.dscpower.com/mgps-1p-2000-watt-military-power-supply daily 0.75 2025-08-07 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/4c349a3c-4447-4c2f-b29e-f871cd55feb5/MGPS2000-1P-XX-Single-Phase-Series-Military-Grade-Power-Supply.jpg MGPS-1P 2000 Watt Military Power Supply - MGPS20 00-1P-XX: Single Phase, Military Grade, Power Supply Product Specification Product Description This product is a 2000 watt, single output, military grade power supply designed for electronic systems operating in harsh environments under adverse temperature conditions. It is intended for a single phase, AC power source and designed to meet applicable military standards for airborne, ground and shipboard applications. Product Features Meets MIL-STD-461/704/810/1399 Operating Temperature Range: -40º to +85ºC Conduction Cooled, Baseplate Mounting AC Input Voltage Input Range: 90-264Vac (115/208/230/240VAC nominal input) Frequency Range: 47-63Hz (50/60Hz nominal) Phase: Single Phase, 2 wire plus ground Power Factor Correction: 0.95 min @ 115Vac, full load. Designed to meet MIL-STD-1399, Section 300A (60Hz) Input Transient Protection: Designed to meet MIL-STD-704A/D (80Vdc for 100mSec) Input Surge Protection: Designed to meet MIL-STD-1275A/D (100Vdc for 50mSec) Output Selection Guide Single Output Voltages: 12Vdc, 24Vdc, 28Vdc, & 48Vdc (Custom output voltages are available, consult factory) DC Output Characteristics (floating) Output Power: 2000 watts (maximum continuous power, may require derating for some low voltage outputs) Line Regulation: ±2.0% Typical Load Regulation: ±2.0% Typical (No load to full load; nominal input) Output Ripple/Noise: 1% Typical (pk-pk; nominal input; full load; 20MHz bandwidth) Set Point Accuracy: ±1.0% of Output Voltage (Nominal input; full load; 25°C) Transient Response: Output voltage returns to within 1% in less than 2.5mS for a 50% load change and the peak transient does not excess 5% Overshoot: Turn-on and turn-off overshoot should not exceed 5% over nominal voltage Electrical Characteristics Switching Frequency: 250KHz Fixed Efficiency: 88% Typical (Measuring at 115Vac and at full load) Turn On Delay: 250 to 500mS (To nominal output voltage) Isolation Voltage: Input to Output: 3000VAC Input to Chassis: 1500VAC (30 seconds) Output to Chassis: 500Vdc Isolation Resistance: 100Mohms (Input to output) Temperature Regulation: +/- 0.005%/degree C (+/- 2% Maximum over operating temp range) Protection Over Current Limit: 115 to 130%. Auto-recovery after removal of overload condition Over-Voltage Setpoint: 108 to 125% of output voltage. Unit latched 1 minute, recycle AC input to reset Short Circuit: Auto-recovery after short circuit condition is removed Over Temperature Protection: The power supply is protected for over temperature conditions with thermal shutdown. Auto-Recovery when temperature returns to normal Environmental Operating Temperature: -40º to +85ºC (baseplate) Storage Temperature: -50º to +100ºC Operating Humidity: 10% to 90%, non-condensing Storage Humidity: 5% to 95%, non-condensing Operating Altitude: Sea-level to 15,000 ft. max. Shock & Vibration: Designed to meet MIL-STD-810G EMC Radiated & Conducted EMI: Designed to meet MIL-STD-461F Cooling Conduction Cooling: Baseplate not to exceed +85ºC for full rated output Mechanical Enclosure: Metal chassis, Aluminum baseplate and enclosure, gold finish Outline Dimensions: 2.65” X 8.0" X 14.0" (H X W X L) – excluding I/O connectors Weight: 9.5 lbs. AC Input Connector: D38999/20WC04PN DC Output Connector: D38999/20WE6SN Optional Features, Controls or Alarms Consult factory Note Product specifications subject to change without notice. https://www.dscpower.com/atx-power-supplies daily 0.75 2025-07-24 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/da8c547d-2ab6-45d3-a207-4beedabb2201/ATX-Industrial-Computer-Power-Supply-FSAK660P-Series.jpg ATX - PS2 Power Supplies - 660 Watt - ATX with Customizable Outputs Configurable & Parallelable Outputs Up to 8 Outputs plus 5V Standby Output Options: 3.3V, 5V, 12V, & 24V Industry Standard PS/2 Form Factor https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/840c5ec5-3e0a-4b5d-8ddd-67e1d9a6cd65/ATX-Industrial-Computer-Power-Supply-FSAK750P-Series.jpg ATX - PS2 Power Supplies - 750 Watt - ATX with Customizable Outputs Configurable & Parallelable Outputs Up to 8 Outputs with 5V Standby Output Options: 3.3V, 5V, 12V, & 24V Industry Standard PS/2 Form Factor https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/b2e3aae3-6360-4669-a3c2-1cd20364a619/ATX-Industrial-Computer-Power-Supply-FSAK850P-Series.jpg ATX - PS2 Power Supplies - 850 Watt - ATX with Customizable Outputs Configurable & Parallelable Outputs Up to 8 Outputs with 5V Stby Output Options: 3.3V, 5V, 12V, & 24V Industry Standard PS/2 Form Factor https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/d916d64e-8a62-497a-9db4-a3bbf0428d81/ATX-Industrial-Computer-Power-Supply-FSAK1000P-Series.jpg ATX - PS2 Power Supplies - 1000 Watt - ATX with Customizable Outputs Configurable & Parallelable Outputs Up to 8 Outputs with 5V Stby Output Options: 3.3V, 5V, 12V, & 24V Industry Standard PS/2 Form Factor https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/9611ef38-991d-41da-a0b0-e930d5db31e9/ATX-Industrial-Computer-Power-Supply-FSAK1200P-Series.jpg ATX - PS2 Power Supplies - 1200 Watt - ATX with Customizable Outputs Configurable & Parallelable Outputs Up to 8 Outputs with 5V Stby Output Options: 3.3V, 5V, 12V, & 24V Industry Standard PS/2 Form Factor https://www.dscpower.com/mgps-1p-2400-watt-military-power-supply daily 0.75 2025-08-07 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/edbda56f-8fd5-45ce-8769-fc40863a981c/MGPS2400-1P-XX-Single-Phase-Series-Military-Grade-Power-Supply.jpg MGPS-1P 2400 Watt Military Power Supply - MGPS24 00-1P-XX: Single Output, Military Grade, Power Supply - Product Specification Product Description This product is a 2400 watt, single output, military grade power supply designed for electronic systems operating in harsh environments under adverse temperature conditions. It is intended for a single phase, AC power source and designed to meet applicable military standards for airborne, ground and shipboard applications. Product Features Meets MIL-STD-461/704/810/1399 Wide Frequency Range: 47 to 440Hz Operating Temperature Range: -40º to +85ºC Baseplate Mounting, Conduction Cooled AC Input Voltage Input Range: 90-264Vac (115/208/230VAC nominal input) Frequency Range: 47-63Hz (50/60Hz nominal) Phase: Single Phase, 2 wire plus ground Power Factor Correction: 0.95 min @ 115Vac, full load. Designed to meet MIL-STD-1399, Section 300A (60Hz) Input Transient Protection: Designed to meet MIL-STD-704A/D (80Vdc for 100mSec) Input Surge Protection: Designed to meet MIL-STD-1275A/D (100Vdc for 50mSec) Output Selection Guide Single Output Voltages: 12Vdc, 24Vdc, 28Vdc, & 48Vdc (Custom output voltages are available, consult factory) DC Output Characteristics (floating) Output Power: 2400 watts (maximum continuous power, may require derating for some low voltage outputs) Line Regulation: ±2.0% Typical Load Regulation: ±2.0% Typical (No load to full load; nominal input) Output Ripple/Noise: 1% Typical (pk-pk; nominal input; full load; 20MHz bandwidth) Set Point Accuracy: ±1.0% of Output Voltage (Nominal input; full load; 25°C) Transient Response: Output voltage returns to within 1% in less than 2.5mS for a 50% load change and the peak transient does not excess 5% Overshoot: Turn-on and turn-off overshoot should not exceed 5% over nominal voltage Electrical Characteristics Switching Frequency: 360KHz Fixed Efficiency: 88% Typical (Measuring at 115Vac and at full load) Turn On Delay: 250 to 500mS (To nominal output voltage) Isolation Voltage: Input to Output: 3000VAC Input to Chassis: 1500VAC (30 seconds) Output to Chassis: 500Vdc Isolation Resistance: 100Mohms (Input to output) Temperature Regulation: +/- 0.005%/degree C (+/- 2% Maximum over operating temp range) Protection Over Current Limit: 115 to 130%. Auto-recovery after removal of overload condition Over-Voltage Setpoint: 108 to 125% of output voltage. Unit latched 1 minute, recycle AC input to reset Short Circuit: Auto-recovery after short circuit condition is removed Over Temperature Protection: The power supply is protected for over temperature conditions with thermal shutdown. Auto-Recovery when temperature returns to normal Environmental Operating Temperature: -40º to +85ºC (baseplate) Storage Temperature: -50º to +100ºC Operating Humidity: 10% to 90%, non-condensing Storage Humidity: 5% to 95%, non-condensing Operating Altitude: Sea-level to 15,000 ft. max. Shock & Vibration: Designed to meet MIL-STD-810G EMC Radiated & Conducted EMI: Designed to meet MIL-STD-461F Cooling Conduction Cooling: Baseplate not to exceed +85ºC for full rated output Mechanical Enclosure: Metal chassis, aluminum baseplate and enclosure, gold finish Outline Dimensions: 2.65” X 8.0" X 14.0" (H X W X L) – excluding I/O connectors Weight: 9.5 lbs. AC Input Connector: D38999/20WC04PN DC Output Connector: D38999/20WE6SN Optional Features, Controls or Alarms Consult factory Note Product specifications subject to change without notice. https://www.dscpower.com/ip67-1400-watt-industrial-power-supply daily 0.75 2025-07-14 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/7d7c7407-fadd-40af-b7d2-c014bcb114d1/IP67IPS1400-XX-Single-Output-Industrial-Grade-Power-Supply.jpg IP67 1400 Watt Industrial Power Supply - IP67IPS1400-XX: Single Phase, Industrial Grade Power Supply Product Specification Product Description This product is a 1400 watt, single output, industrial grade power supply designed for electronic systems operating in demanding environments with adverse temperature conditions. It is a single phase, AC input power supply enclosed in an IP66 rated chassis for remote operations requiring the highest degree of reliability. Product Features Designed to meet IECEX/ATEX/NRTL/CE IP66 Rated Chassis Operating Temperature Range: -40º to +85ºC Conduction Cooled, Baseplate Mounting AC Input Voltage Input Range: 90-264Vac Frequency: 50/60/400Hz (47-440Hz) Phase: Single Phase, 2 wire plus ground Power Factor Correction: 0.95 min @ 115Vac, full load Input Transient Protection: Designed to meet MIL-STD-704A/D (80Vdc for 100mSec) Input Surge Protection: Designed to meet MIL-STD-1275A/D (100Vdc for 50mSec) Output Selection Guide Single Output Voltages: 12Vdc, 15Vdc, 24Vdc, 28Vdc, 36Vdc, & 48Vdc (Custom output voltages are available, consult factory) DC Output Characteristics (floating) Output Power: 1400 watts (maximum continuous power, may require derating for some low voltage outputs) Line Regulation: ±2.0% Typical Load Regulation: ±2.0% Typical (No load to full load; nominal input) Output Ripple/Noise: 1% Typical (pk-pk; nominal input; full load; 20MHz bandwidth) Set Point Accuracy: ±1.0% of Output Voltage (Nominal input; full load; 25°C) Transient Response: Output voltage returns to within 1% in less than 2.5mS for a 50% load change and the peak transient does not excess 5% Overshoot: Turn-on and turn-off overshoot should not exceed 5% over nominal voltage Electrical Characteristics Switching Frequency: 250KHz Fixed Efficiency: 88% Typical (Measuring at 115Vac and at full load) Turn On Delay: 250 to 500mS (To nominal output voltage) Isolation Voltage: Input to Output: 3000VAC Input to Chassis: 1500VAC (30 seconds) Output to Chassis: 500Vdc Isolation Resistance: 100Mohms (Input to output) Temperature Regulation: ±0.005%/degree C (±2% Maximum over operating temp range) Protection Over Current Limit: 115 to 130%. Auto-recovery after removal of overload condition Over-Voltage Setpoint: 108 to 125% of output voltage. Unit latched 1 minute, recycle AC input to reset Short Circuit: Auto-recovery after short circuit condition is removed Over Temperature Protection: The power supply is protected for over temperature conditions with thermal shutdown. Auto-Recovery when temperature returns to normal Environmental Operating Temperature: -40º to +85ºC (baseplate) Storage Temperature: -50º to +100ºC Operating Humidity: 10% to 95%, non-condensing Storage Humidity: 5% to 95%, non-condensing Operating Altitude: Sea-level to 10,000 ft. Shock & Vibration: Designed to meet MIL-STD-810H EMC Radiated & Conducted EMI: Designed to meet EN55022 Level B, CISPR 22 and FCC (Part J) Class B Cooling Conduction Cooling: Baseplate not to exceed +85ºC for full rated output Mechanical Enclosure: Metal chassis, aluminum baseplate and enclosure, anodized finish Outline Dimensions: 8.0" X 12.0" X 6.0" (W X L X H) – Including I/O connectors Weight: 9.0 lbs. AC Input Connector (J1): Amphenol PN RT07144PNH DC Output Connector (J2): Amphenol PN RT07144SNH Optional Features, Controls or Alarms Consult factory Note Product specifications subject to change without notice https://www.dscpower.com/mgps-1p-1000-watt-military-power-supply daily 0.75 2025-07-14 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/37864420-2a35-4f6e-80e8-8a591527c901/MGPS1000-1P-XX-Single-Phase-Series-Military-Grade-Power-Supply.jpg MGPS-1P 1000 Watt Military Power Supply - MGPS1000-1P-XX: 1000 Watt, Single Output, Military Grade Power Supply - Product Specification Product Description This product is a 1000 watt, single output, military grade power supply designed for electronic systems operating in harsh environments under adverse temperature conditions. It is intended for a single phase, AC power source and designed to meet applicable military standards for airborne, ground and shipboard applications. Product Features Meets MIL-STD-461/704/810/1399 Wide Frequency Range: 47 to 440Hz Operating Temperature Range: -40º to +85ºC Conduction Cooled, Baseplate Mounting AC Input Voltage Input Range: 90-264Vac (115/208/230/240VAC nominal input) Frequency Range: 47-440Hz (50/60/400Hz nominal) Phase: Single Phase, 2 wire plus ground Power Factor Correction: 0.95 min @ 115Vac, full load. Designed to meet MIL-STD-1399, Section 300A (60Hz) Input Transient Protection: Designed to meet MIL-STD-704A/D (80Vdc for 100mSec) Input Surge Protection: Designed to meet MIL-STD-1275A/D (100Vdc for 50mSec) Output Selection Guide Single Output Voltages: 12Vdc, 24Vdc, 28Vdc, & 48Vdc (Custom output voltages are available, consult factory) DC Output Characteristics (floating) Output Power: 1000 watts (maximum continuous power, may require derating for some low voltage outputs) Line Regulation: ±2.0% Typical Load Regulation: ±2.0% Typical (No load to full load; nominal input) Output Ripple/Noise: 1% Typical (pk-pk; nominal input; full load; 20MHz bandwidth) Set Point Accuracy: ±1.0% of Output Voltage (Nominal input; full load; 25°C) Transient Response: Output voltage returns to within 1% in less than 2.5mS for a 50% load change and the peak transient does not excess 5% Overshoot: Turn-on and turn-off overshoot should not exceed 5% over nominal voltage Electrical Characteristics Switching Frequency: 250KHz Fixed Efficiency: 88% Typical (Measuring at 115Vac and at full load) Turn On Delay: 250 to 500mS (To nominal output voltage) Isolation Voltage: Input to Output: 3000VAC Input to Chassis: 1500VAV (30 seconds) Output to Chassis: 500Vdc Isolation Resistance: 100Mohms (Input to output) Temperature Regulation: +/- 0.005%/degree C (+/- 2% Maximum over operating temp range) Protection Over Current Limit: 115 to 130%. Auto-recovery after removal of overload condition Over-Voltage Setpoint: 108 to 125% of output voltage. Unit latched 1 minute, recycle AC input to reset Short Circuit: Auto-recovery after short circuit condition is removed Over Temperature Protection: The power supply is protected for over temperature conditions with thermal shutdown. Auto-Recovery when temperature returns to normal Environmental Operating Temperature: -40º to +85ºC (baseplate) Storage Temperature: -50º to +100ºC Operating Humidity: 10% to 95%, non-condensing Storage Humidity: 5% to 95%, non-condensing Operating Altitude: Sea-level to 15,000 ft. max Shock & Vibration: Designed to meet MIL-STD-810H EMC Radiated & Conducted EMI: Designed to meet MIL-STD-461F/G Cooling Conduction Cooling: Baseplate not to exceed +85ºC for full rated output Mechanical Enclosure: Metal chassis, aluminum baseplate and enclosure, gold finish Outline Dimensions: 2.6” x 7.5" X 11.0" (H X W X L) – excluding I/O connectors Weight: 7.5 lbs. AC Input Connector: D38999/20WC04PN. DC Output Connector: D38999/20WE6SN Optional Features, Controls or Alarms Consult factory Note Product specifications subject to change without notice https://www.dscpower.com/mgps-3p-1000-watt-aerospace-power-supply daily 0.75 2025-07-14 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/ccb70663-f60c-41ed-bb43-13dfbd6c31fe/MGPS1000-3P-XX-Single-Output-Military-Grade-Power-Supply.jpg MGPS-3P 1000 Watt Aerospace Power Supply - MGPS1000-3P-XX: Three Phase Series, Aerospace Power Supply Product Specification Product Description This product is a 1000 watt, single output, military grade power supply designed for electronic systems operating in harsh environments under severe temperature conditions. It is intended for aerospace operations that utilize a 3 phase, 400Hz, AC power sources and designed to meet applicable military standards for airborne applications. Product Features Meets MIL-STD-461/704/810 Wide Frequency Range: 360 to 440Hz Operating Temperature Range: -40º to +85ºC Conduction Cooled, Baseplate Mounting AC Input Voltage Input Range: 95-138Vac (115Vac nominal) Frequency: 400Hz (360-440Hz) Phase: Three Phase, 3 wire plus ground Power Factor Correction: 0.95 min @ 115Vac, full load Input Transient Protection: Designed to meet MIL-STD-704A/D (80Vdc for 100mSec) Input Surge Protection: Designed to meet MIL-STD-1275A/D (100Vdc for 50mSec) Output Selection Guide Single Output Voltages: 12Vdc, 24Vdc, 28Vdc, & 48Vdc (Custom output voltages are available, consult factory) DC Output Characteristics (floating) Output Power: 1000 watts (maximum continuous power, may require derating for some low voltage outputs) Line Regulation: ±2.0% Typical Load Regulation: ±2.0% Typical (No load to full load; nominal input) Output Ripple/Noise: 1% Typical (pk-pk; nominal input; full load; 20MHz bandwidth) Set Point Accuracy: ±1.0% of Output Voltage (Nominal input; full load; 25°C) Transient Response: Output voltage returns to within 1% in less than 2.5mS for a 50% load change and the peak transient does not excess 5% Overshoot: Turn-on and turn-off overshoot should not exceed 5% over nominal voltage Electrical Characteristics Switching Frequency: 250KHz Fixed Efficiency: 88% Typical (Measuring at 115Vac and at full load) Turn On Delay: 250 to 500mS (To nominal output voltage) Isolation Voltage: Input to Output: 3000VAC Input to Chassis: 1500VAC (30 seconds) Output to Chassis: 500Vdc Isolation Resistance: 100Mohms (Input to output) Temperature Regulation: +/- 0.005%/degree C (+/- 2% Maximum over operating temp range) Protection Over Current Limit: 115 to 130%. Auto-recovery after removal of overload condition Over-Voltage Setpoint: 108 to 125% of output voltage. Unit latched 1 minute, recycle AC input to reset Short Circuit: Auto-recovery after short circuit condition is removed Over Temperature Protection: The power supply is protected for over temperature conditions with thermal shutdown. Auto-Recovery when temperature returns to normal Environmental Operating Temperature: -40º to +85ºC (baseplate) Storage Temperature: -50º to +100ºC Operating Humidity: 10% to 95%, non-condensing Storage Humidity: 5% to 95%, non-condensing Operating Altitude: Sea-level to 40,000 ft. Shock & Vibration: Designed to meet MIL-STD-810H EMC Radiated & Conducted EMI: Designed to meet MIL-STD-461F/G Cooling Conduction Cooling: Baseplate not to exceed +85ºC for full rated output Mechanical Enclosure: Metal chassis, aluminum baseplate and enclosure, non-finish Outline Dimensions: 2.6" X 7.5" X 11.0" (H X W X L) – Excluding I/O connectors Weight: 7.5 lbs. AC Input Connector (J1): ITT Cannon PN: DBMMD5W5P DC Output Connector (J2): ITT Cannon PN: DBMMD9H4SJ Optional Features, Controls or Alarms Consult factory Note Product specifications subject to change without notice https://www.dscpower.com/agps-500-watt-do160-power-supply daily 0.75 2026-01-14 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/c2d4ace6-ed68-4a60-b0d9-f489d986e8a5/AGPS500-1P-XX-Single-Output-DO-160-Grade-Power-Supply.jpg AGPS 500 Watt DO-160 Power Supply - AGPS500-1P-XX: DO-160 Grade, Single Phase, Power Supply Product Specification Product Description This product is a 500 watt, single output, DO-160 grade, power supply designed for electronics systems operating in avionics environments. This power supply includes an active PFC input section and an EMI filtering stage to meet power quality requirements for Boeing and Airbus aircraft operations. Product Features Designed to Meet RTCA/DO-160 Power Requirements Operating Temperature Range: -40º to +85ºC Baseplate Mounting, Conduction Cooled AC Input Voltage Input Range: 90-134Vac (115Vac nominal) Frequency Range: 360-440Hz (Optional 360-800Hz) Phase: Single Phase, 2 wire plus ground Power Factor Correction: 0.95 min @ 115Vac, full load Input Power Compliance: Designed to meet RTCA/DO-160F, Section 16 Voltage Spike Immunity: Designed to meet RTCA/DO-160F, Section 17 Output Selection Guide Single Output Voltages: 12Vdc, 24Vdc, 28Vdc, & 48Vdc (Custom output voltages are available, consult factory) DC Output Characteristics (floating) Output Power: 500 watts (maximum continuous power, may require derating for some low voltage outputs) Line Regulation: ±2.0% Typical Load Regulation: ±2.0% Typical (No load to full load; nominal input) Output Ripple/Noise: 1% Typical (pk-pk; nominal input; full load; 20MHz bandwidth) Set Point Accuracy: ±1.0% of Output Voltage (Nominal input; full load; 25°C) Transient Response: Output voltage returns to within 1% in less than 2.5mS for a 50% load change and the peak transient does not excess 5% Overshoot: Turn-on and turn-off overshoot should not exceed 5% over nominal voltage Electrical Characteristics Switching Frequency: 250KHz Fixed Efficiency: 88% Typical. Measuring at 115Vac and at full load (85% typical for 12V output model) Turn On Delay: 250 to 500mS (To nominal output voltage) Isolation Voltage: Input to Output: 3000VAC Input to Chassis: 1500VAC (30 seconds) Output to Chassis: 500Vdc Isolation Resistance: 100Mohms (Input to output) Temperature Regulation: ±0.005%/degree C (±2% Maximum over operating temp range) Protection Over Current Limit: 115 to 130%. Auto-recovery after removal of overload condition Over-Voltage Setpoint: 108 to 125% of output voltage. Unit latched 1 minute, recycle AC input to reset Short Circuit: Auto-recovery after short circuit condition is removed Over Temperature Protection: The power supply is protected for over temperature conditions with thermal shutdown. Auto-Recovery when temperature returns to normal Environmental Operating Temperature: -40º to +85ºC (baseplate) Storage Temperature: -50º to +100ºC Operating Humidity: 10% to 95%, non-condensing Storage Humidity: 5% to 95%, non-condensing Operating Altitude: Sea-level to 40,000 ft. Shock & Vibration: Designed to meet RTCA/DO-160 Section 7, Cat B & Section 8, Category Z, Curve B RF Susceptibility (Conducted & Radiated): Designed to meet RTCA/DO-160, Section 20, Category M Emissions (Conducted & Radiated): Designed to meet RTCA/DO-160, Section 21, Category M Cooling Conduction Cooling: Baseplate not to exceed +85ºC for full rated output Mechanical Enclosure: Metal chassis, aluminum baseplate and enclosure, non-finish Outline Dimensions: 5.0" X 8.0" X 2.5" (W X L X H) – not including I/O connector Weight: 3.5 lbs. AC Input Connector (J1): D-Sub Type or EQ. DC Output Connector (J2): D-Sub Type or EQ. Optional Features, Controls or Alarms Consult factory Note Product specifications subject to change without notice. https://www.dscpower.com/fsak-1u-750-watt-atx-industrial-power-supply daily 0.75 2020-09-17 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/1600351265592-Q1JFL05Y6MC3QG4ZWNRI/FSAK-F_750_Watt_1U_ATX_Industrial_Computer_Power_Supply.jpg FSAK-1U 750 Watt ATX Industrial Power Supply - FSAK750K: 750 Watt, 1U ATX Industrial Computer Power Supply Product Specification Product Description This 750 watt, 1U ATX industrial computer power supply is designed for applications requiring “hot-swap” capability to provide the OEM with a quick, interchangeable power module or for use in a N+1 redundancy configuration. This design utilizes active current sharing and incorporates OR-ing isolation MOFETS to minimize voltage drop. Product Features Hot Swap, N+1, Parallelable Power Module Single Output: 12V (Optional 24V, 28V, 48V or 56V) Optional N+1 Rack Chassis for up to 3 Power Modules AC Input Voltage Input Range: 90-264Vac Frequency Range: 47-63Hz Phase: Single Phase Typical Input Current: 8.1A at 115Vac input, full load Power Factor Correction: 0.95 min @ 115Vac, full load Typical Leakage Current: 700uA at 240Vac https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/1600108918104-IRX5M942E5JU9R6Y05MY/FASK750F-1U+Output+Table.jpg FSAK-1U 750 Watt ATX Industrial Power Supply Output Table Notes: 1. Total continuous combined output(s) wattage: 750W. 2. Peak current of 12V is 110% of max rated current up to 15mS at 115Vac nominal input. https://www.dscpower.com/mgps-3p-2000-watt-aerospace-power-supply daily 0.75 2025-07-14 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/55d7c954-4bc0-486b-b341-4abba1a8f5fc/MGPS2000-3P-XX-Single-Output-Military-Grade-Power-Supply.jpg MGPS-3P 2000 Watt Aerospace Power Supply - MGPS2000-3P-XX: Three Phase Series, Aerospace Power Supply Product Specification Product Description This product is a 2000 watt, single output, military grade power supply designed for electronic systems operating in harsh environments under severe temperature conditions. It is intended for aerospace operations that utilize a 3 phase, 400Hz, AC power sources and designed to meet applicable military standards for airborne applications. Product Features Meets MIL-STD-461/704/810 Wide Frequency Range: 360 to 440Hz Operating Temperature Range: -40º to +85ºC Conduction Cooled, Baseplate Mounting AC Input Voltage Input Range: 95-138VAC (115VAC nominal) Frequency: 400Hz (360-440Hz) Phase: Three Phase, 3 wire plus ground Power Factor Correction: 0.95 min @ 115Vac, full load Input Transient Protection: Designed to meet MIL-STD-704A/D (80Vdc for 100mSec) Input Surge Protection: Designed to meet MIL-STD-1275A/D (100Vdc for 50mSec) Output Selection Guide Single Output Voltages: 12Vdc, 24Vdc, 28Vdc, & 48Vdc (Custom output voltages are available, consult factory) DC Output Characteristics (floating) Output Power: 2000 watts (maximum continuous power, may require derating for some low voltage outputs) Line Regulation: ±2.0% Typical Load Regulation: ±2.0% Typical (No load to full load; nominal input) Output Ripple/Noise: 1% Typical (pk-pk; nominal input; full load; 20MHz bandwidth) Set Point Accuracy: ±1.0% of Output Voltage (Nominal input; full load; 25°C) Transient Response: Output voltage returns to within 1% in less than 2.5mS for a 50% load change and the peak transient does not excess 5% Overshoot: Turn-on and turn-off overshoot should not exceed 5% over nominal voltage Electrical Characteristics Switching Frequency: 250KHz Fixed Efficiency: 88% Typical (Measuring at 115Vac and at full load) Turn On Delay: 250 to 500mS (To nominal output voltage) Isolation Voltage: Input to Output: 3000VAC Input to Chassis: 1500VAC (30 seconds) Output to Chassis: 500Vdc Isolation Resistance: 100Mohms (Input to output) Temperature Regulation: +/- 0.005%/degree C (+/- 2% Maximum over operating temp range) Protection Over Current Limit: 115 to 130%. Auto-recovery after removal of overload condition Over-Voltage Setpoint: 108 to 125% of output voltage. Unit latched 1 minute, recycle AC input to reset Short Circuit: Auto-recovery after short circuit condition is removed Over Temperature Protection: The power supply is protected for over temperature conditions with thermal shutdown. Auto-Recovery when temperature returns to normal Environmental Operating Temperature: -40º to +85ºC (baseplate) Storage Temperature: -50º to +100ºC Operating Humidity: 5% to 90% RH, Non-condensing Storage Humidity: 5% to 95% RH, Non-condensing Operating Altitude: Sea-level to 40,000 ft. Shock & Vibration: Designed to meet MIL-STD-810H EMC Radiated & Conducted EMI: Designed to meet MIL-STD-461F/G Cooling Conduction Cooling: Baseplate not to exceed +85ºC for full rated output Mechanical Enclosure: Metal chassis, aluminum baseplate and enclosure, non-finish Outline Dimensions: 2.65” X 8.0" X 14.0" (H X W X L) – Excluding I/O connectors Weight: 9.5 lbs. AC Input Connector (J1): ITT Cannon PN: DBMMD5W5P DC Output Connector (J2): ITT Cannon PN: DBMMD9H4SJ Optional Features, Controls or Alarms Consult factory Note Product specifications subject to change without notice https://www.dscpower.com/fsak-1u-1000-watt-atx-industrial-power-supply daily 0.75 2020-09-17 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/1600351464198-MW99TAUJS7HSLYEBOKZU/FSAK-F_1000_Watt_1U_ATX_Industrial_Computer_Power_Supply.jpg FSAK-1U 1000 Watt ATX Industrial Power Supply - FSAK1000F: 1000 Watt, 1U ATX Industrial Computer Power Supply Product Specification Product Description This 1000 watt, 1U ATX industrial computer power supply is designed for applications requiring “hot-swap” capability to provide the OEM with a quick, interchangeable power module or for use in a N+1 redundancy configuration. This design utilizes active current sharing and incorporates OR-ing isolation MOFETS to minimize voltage drop. Product Features Hot Swap, N+1, Parallelable Power Module Single Output: 12V (Optional 24V, 28V, 48V or 56V) Optional N+1 Rack Chassis for up to 3 Power Modules AC Input Voltage Input Range: 90-264Vac Frequency Range: 47-63Hz Phase: Single Phase Typical Input Current: 10.7A at 115Vac input, full load Power Factor Correction: 0.95 min @ 115Vac, full load Typical Leakage Current: 700uA at 240Vac https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/1600109056516-WGUU0OGKNQS5867I4PXJ/FASK1000F-1U+Output+Table.jpg FSAK-1U 1000 Watt ATX Industrial Power Supply Output Table Notes: 1. Total continuous combined output(s) wattage: 1000W. 2. Peak current of 12V is 110% of max rated current up to 15mS at 115Vac nominal input. https://www.dscpower.com/fsak-750-watt-atx-industrial-power-supply daily 0.75 2025-07-24 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/eedc4a9b-ce17-492f-967c-6a0fb3556f41/FSAK750P-750-Watt-ATX-Industrial-Computer-Power-Supply.jpg FSAK 750 Watt ATX Industrial Power Supply - FSAK750P-XX: 750 Watt, ATX Industrial Computer Power Supply Product Specification Product Description This 750 watt, ATX power supply has customizable outputs to provide the OEM flexibility to custom tailor output loads to better fit their system’s power needs. This unique design offers up to 8 outputs (plus 5V standby) in which outputs can be paralleled to provide increased current for individual voltage rails. There is even a 24Vdc output to meet CompactPCI and VME platform requirements. Product Features Configurable Outputs for Load Flexibility Up to 8 Outputs with 5V Standby Optional Output Voltages: 3.3V, 5V, 12V, & 24V Industry Standard PS/2 Form Factor AC Input Voltage Input Range: 90-264Vac Frequency Range: 47-63Hz Phase: Single Phase Typical Input Current: 8.1A at 115Vac input, full load Power Factor Correction: 0.95 min @ 115Vac, full load Typical Leakage Current: 700uA at 240Vac https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/1599178685451-TA0VV7Y0MN9YNVEKC28O/FSAK750P+Output+Selection+Matrix.jpg FSAK 750 Watt ATX Industrial Power Supply Output Selection Guide Notes: 1. Total continuous combined output(s) wattage: 750W. 2. Minimum load of 0.5A on V1, no minimum load required on other outputs. 3. Maximum combined current for V1 & V1a: 62.5A. 4. Maximum combined current for V2 & V3: 170W. 5. V1a is isolated from main outputs by inductor as source of system fans. 6. All output rails could be optional except got 12V (V1). https://www.dscpower.com/agps-1000-watt-do160-power-supply daily 0.75 2026-01-14 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/97793682-031f-40a5-a8bc-54df55ffca4b/AGPS1000-1P-XX-Single-Output-DO-160-Grade-Power-Supply.jpg AGPS 1000 Watt DO-160 Power Supply - AGPS1000-1P-XX: Single Phase, DO-160 Grade, Power Supply Product Specification Product Description This product is a 1000 watt, single output, DO-160 grade, power supply designed for electronics systems operating in avionics environments. This power supply includes an active PFC input section and an EMI filtering stage to meet power quality requirements for Boeing and Airbus aircraft operations. Product Features Designed to Meet RTCA/DO-160 Power Requirements Operating Temperature Range: -40º to +85ºC Conduction Cooled, Baseplate Mounting AC Input Voltage Input Range: 90-134Vac (115Vac nominal) Frequency Range: 360-440Hz (Optional 360-800Hz) Phase: Single Phase, 2 wire plus ground Power Factor Correction: 0.95 min @ 115Vac, full load Input Power Compliance: Designed to meet RTCA/DO-160F, Section 16 Voltage Spike Immunity: Designed to meet RTCA/DO-160F, Section 17 Output Selection Guide Single Output Voltages: 12Vdc, 24Vdc, 28Vdc, & 48Vdc (Custom output voltages are available, consult factory) DC Output Characteristics (floating) Output Power: 1000 watts (maximum continuous power, may require derating for some low voltage outputs) Line Regulation: ±2.0% Typical Load Regulation: ±2.0% Typical (No load to full load; nominal input) Output Ripple/Noise: 1% Typical (pk-pk; nominal input; full load; 20MHz bandwidth) Set Point Accuracy: ±1.0% of Output Voltage (Nominal input; full load; 25°C) Transient Response: Output voltage returns to within 1% in less than 2.5mS for a 50% load change and the peak transient does not excess 5% Overshoot: Turn-on and turn-off overshoot should not exceed 5% over nominal voltage Electrical Characteristics Switching Frequency: 250KHz Fixed Efficiency: 85% Typical (Measuring at 115Vac and at full load) Turn On Delay: 250 to 500mS (To nominal output voltage) Isolation Voltage: Input to Output: 3000VAC Input to Chassis: 1500VAC (30 seconds) Output to Chassis: 500Vdc Isolation Resistance: 100Mohms (Input to output) Temperature Regulation: ±0.005%/degree C (±2% Maximum over operating temp range) Protection Over Current Limit: 115 to 130%. Auto-recovery after removal of overload condition Over-Voltage Setpoint: 108 to 125% of output voltage. Unit latched 1 minute, recycle AC input to reset Short Circuit: Auto-recovery after short circuit condition is removed Over Temperature Protection: The power supply is protected for over temperature conditions with thermal shutdown. Auto-Recovery when temperature returns to normal Environmental Operating Temperature: -40º to +85ºC (baseplate) Storage Temperature: -50º to +100ºC Operating Humidity: 10% to 95%, non-condensing Storage Humidity: 5% to 95%, non-condensing Operating Altitude: Sea-level to 40,000 ft. Shock & Vibration: Designed to meet RTCA/DO-160 Section 7, Cat B & Section 8, Category Z, Curve B RF Susceptibility (Conducted & Radiated): Designed to meet RTCA/DO-160, Section 20, Category M Emissions (Conducted & Radiated): Designed to meet RTCA/DO-160, Section 21, Category M Cooling Conduction Cooling: Baseplate not to exceed +85ºC for full rated output Mechanical Enclosure: Metal chassis, aluminum baseplate and enclosure, gold finish Outline Dimensions: 7.5" X 11.0" X 2.6" (W X L X H) – excluding I/O connector Weight: 7.5 lbs. AC Input Connector (J1): ITT Cannon PN: DBMM5W5P DC Output Connector (J2): ITT Cannon PN: DBMMD9H4SJ Optional Features, Controls or Alarms Consult factory Note Product specifications subject to change without notice. https://www.dscpower.com/mgps-3p-1400-watt-aerospace-power-supply daily 0.75 2025-07-14 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/54a464ca-c64a-4f21-8cef-d1e4dc085b30/MGPS1400-3P-XX-Single-Output-Military-Grade-Power-Supply.jpg MGPS-3P 1400 Watt Aerospace Power Supply - MGPS1400-3P-XX: Three Phase Series, Aerospace Power Supply Product Specification Product Description This product is a 1400 watt, single output, military grade power supply designed for electronic systems operating in harsh environments under severe temperature conditions. It is intended for aerospace operations that utilize a 3 phase, 400Hz, AC power sources and designed to meet applicable military standards for airborne applications. Product Features Meets MIL-STD-461/704/810 Wide Frequency Range: 360 to 440Hz Operating Temperature Range: -40º to +85ºC Conduction Cooled, Baseplate Mounting, AC Input Voltage Input Range: 95-138VAC (115VAC nominal) Frequency: 400Hz (360-440Hz) Phase: Three Phase, 3 wire plus ground Power Factor Correction: 0.95 min @ 115Vac, full load Input Transient Protection: Designed to meet MIL-STD-704A/D (80Vdc for 100mSec) Input Surge Protection: Designed to meet MIL-STD-1275A/D (100Vdc for 50mSec) Output Selection Guide Single Output Voltages: 12Vdc, 24Vdc, 28Vdc, & 48Vdc (Custom output voltages are available, consult factory) DC Output Characteristics (floating) Output Power: 1400 watts (maximum continuous power, may require derating for some low voltage outputs) Line Regulation: ±2.0% Typical Load Regulation: ±2.0% Typical (No load to full load; nominal input) Output Ripple/Noise: 1% Typical (pk-pk; nominal input; full load; 20MHz bandwidth) Set Point Accuracy: ±1.0% of Output Voltage (Nominal input; full load; 25°C) Transient Response: Output voltage returns to within 1% in less than 2.5mS for a 50% load change and the peak transient does not excess 5% Overshoot: Turn-on and turn-off overshoot should not exceed 5% over nominal voltage Electrical Characteristics Switching Frequency: 250KHz Fixed Efficiency: 88% Typical (Measuring at 115Vac and at full load) Turn On Delay: 250 to 500mS (To nominal output voltage) Isolation Voltage: Input to Output: 3000VAC Input to Chassis: 1500VAC (30 seconds) Output to Chassis: 500Vdc Isolation Resistance: 100Mohms (Input to output) Temperature Regulation: +/- 0.005%/degree C (+/- 2% Maximum over operating temp range) Protection Over Current Limit: 115 to 130%. Auto-recovery after removal of overload condition Over-Voltage Setpoint: 108 to 125% of output voltage. Unit latched 1 minute, recycle AC input to reset Short Circuit: Auto-recovery after short circuit condition is removed Over Temperature Protection: The power supply is protected for over temperature conditions with thermal shutdown. Auto-Recovery when temperature returns to normal Environmental Operating Temperature: -40º to +85ºC (baseplate) Storage Temperature: -50º to +100ºC Operating Humidity: 10% to 95%, non-condensing Storage Humidity: 5% to 95%, non-condensing Operating Altitude: Sea-level to 40,000 ft. Shock & Vibration: Designed to meet MIL-STD-810H EMC Radiated & Conducted EMI: Designed to meet MIL-STD-461F/G Cooling Conduction Cooling: Baseplate not to exceed +85ºC for full rated output Mechanical Enclosure: Metal chassis, aluminum baseplate and enclosure, black-finish Outline Dimensions: 2.6" X 7.5" X 11.0" (H X W X L) – Excluding I/O connectors Weight: 7.5 lbs. AC Input Connector (J1): ITT Cannon PN: DBMMD5W5P DC Output Connector (J2): ITT Cannon PN: DBMMD9H4SJ Optional Features, Controls or Alarms Consult factory Note Product specifications subject to change without notice https://www.dscpower.com/agps-1400-watt-do160-power-supply daily 0.75 2026-03-25 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/80fce0eb-e2be-43e4-bdef-3351c3158387/AGPS1400-3P-XX-Single-Output-DO-160-Grade-Power-Supply.jpg AGPS 1400 Watt DO-160 Power Supply - AGPS1400-3P-XX: 3-Phase, DO-160 Grade, Power Supply Product Specification Product Description This product is a 1400 watt, single output, DO-160 grade, power supply designed for electronics systems operating in avionics environments. This power supply includes an active PFC input section and an EMI filtering stage to meet power quality requirements for Boeing and Airbus aircraft operations. Product Features Designed to Meet RTCA/DO-160 Power Requirements Operating Temperature Range: -40º to +85ºC Baseplate Mounting, Conduction Cooled AC Input Voltage Input Range: 90-134Vac (115Vac nominal) Frequency Range: 360-440Hz (Optional 360-800Hz) Phase: Three Phase, 3 wire plus ground Power Factor Correction: 0.95 min @ 115Vac, full load Input Power Compliance: Designed to meet RTCA/DO-160F, Section 16 Voltage Spike Immunity: Designed to meet RTCA/DO-160F, Section 17 Output Selection Guide Single Output Voltages: 12Vdc, 24Vdc, 28Vdc, & 48Vdc (Custom output voltages are available, consult factory) DC Output Characteristics (floating) Output Power: 1400 watts (maximum continuous power, may require derating for some low voltage outputs) Line Regulation: ±2.0% Typical Load Regulation: ±2.0% Typical (No load to full load; nominal input) Output Ripple/Noise: 1% Typical (pk-pk; nominal input; full load; 20MHz bandwidth) Set Point Accuracy: ±1.0% of Output Voltage (Nominal input; full load; 25°C) Transient Response: Output voltage returns to within 1% in less than 2.5mS for a 50% load change and the peak transient does not excess 5% Overshoot: Turn-on and turn-off overshoot should not exceed 5% over nominal voltage Electrical Characteristics Switching Frequency: 250KHz Fixed Efficiency: 85% Typical (Measuring at 115Vac and at full load) Turn On Delay: 250 to 500mS (To nominal output voltage) Isolation Voltage: Input to Output: 3000VAC Input to Chassis: 1500VAC (30 seconds) Output to Chassis: 500Vdc Isolation Resistance: 100Mohms (Input to output) Temperature Regulation: ±0.005%/degree C (±2% Maximum over operating temp range) Protection Over Current Limit: 115 to 130%. Auto-recovery after removal of overload condition Over-Voltage Setpoint: 108 to 125% of output voltage. Unit latched 1 minute, recycle AC input to reset Short Circuit: Auto-recovery after short circuit condition is removed Over Temperature Protection: The power supply is protected for over temperature conditions with thermal shutdown. Auto-Recovery when temperature returns to normal Environmental Operating Temperature: -40º to +85ºC (baseplate) Storage Temperature: -50º to +100ºC Operating Humidity: 10% to 95%, non-condensing Storage Humidity: 5% to 95%, non-condensing Operating Altitude: Sea-level to 40,000 ft. Shock & Vibration: Designed to meet RTCA/DO-160 Section 7, Cat B & Section 8, Category Z, Curve B RF Susceptibility (Conducted & Radiated): Designed to meet RTCA/DO-160, Section 20, Category M Emissions (Conducted & Radiated): Designed to meet RTCA/DO-160, Section 21, Category M Cooling Conduction Cooling: Baseplate not to exceed +85ºC for full rated output Mechanical Enclosure: Metal chassis, aluminum baseplate and enclosure, non-finish Outline Dimensions: 7.5" X 11.0" X 2.6" (W X L X H) – not including I/O connector Weight: 9.5 lbs. AC Input Connector (J1): ITT Cannon PN: DBMM5W5P DC Output Connector (J2): ITT Cannon PN: DBMMD9H4SJ Optional Features, Controls or Alarms Consult factory Note Product specifications subject to change without notice. https://www.dscpower.com/fsak-850-watt-atx-industrial-power-supply daily 0.75 2025-07-24 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/d85c1e44-ec8a-4373-b60d-e3906d8e7c2c/FSAK850P-850-Watt-ATX-Industrial-Computer-Power-Supply.jpg FSAK 850 Watt ATX Industrial Power Supply - FSAK850P-XX: 850 Watt, ATX Industrial Computer Power Supply Product Specification Product Description This 850 watt, ATX power supply has customizable outputs to provide the OEM flexibility to custom tailor output loads to better fit their system’s power needs. This unique design offers up to 8 outputs (plus 5V standby) in which outputs can be paralleled to provide increased current for individual voltage rails. There is even a 24Vdc output to meet CompactPCI and VME platform requirements. Product Features Configurable Outputs for Load Flexibility Up to 8 Outputs with 5V Standby Optional Output Voltages: 3.3V, 5V, 12V, & 24V Industry Standard PS/2 Form Factor AC Input Voltage Input Range: 90-264Vac Frequency Range: 47-63Hz Phase: Single Phase Typical Input Current: 9.1A at 115Vac input, full load Power Factor Correction: 0.95 min @ 115Vac, full load Typical Leakage Current: 700uA at 240Vac https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/1599236693761-43VFO9O7LY0NV3J7KZ34/FSAK850P+Output+Selection+Matrix.jpg FSAK 850 Watt ATX Industrial Power Supply Output Selection Guide Notes: 1. Total continuous combined output(s) wattage: 850W. 2. Minimum load of 0.5A on V1, no minimum load required on other outputs. 3. Maximum combined current for V1 & V1a: 70A. 4. Maximum combined current for V2 & V3: 170W. 5. V1a is isolated from main outputs by inductor as source of system fans. 6. All output rails could be optional except got 12V (V1). https://www.dscpower.com/ip67-300-watt-industrial-power-supply daily 0.75 2025-07-14 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/7da3f01d-1d3e-4e9a-957d-bfccd0abe663/IP67IPS300-XX-Single-Output-Industrial-Grade-Power-Supply.jpg IP67 300 Watt Industrial Power Supply - IP67IPS300-XX: Single Phase, Industrial Grade Power Supply Product Specification Product Description This product is a 300 watt, single output, industrial grade power supply designed for electronic systems operating in demanding environments with adverse temperature conditions. It is a single phase, AC input power supply enclosed in an IP66 rated chassis for remote operations requiring the highest degree of reliability. Product Features Designed to meet IECEX/ATEX/NRTL/CE IP66 Rated Chassis Operating Temperature Range: -40º to +85ºC Baseplate Mounting, Conduction Cooled AC Input Voltage Input Range: 90-264Vac Frequency: 50/60/400Hz (47-440Hz) Phase: Single Phase, 2 wire plus ground Power Factor Correction: 0.95 min @ 115Vac, full load Input Transient Protection: Designed to meet MIL-STD-704A/D (80Vdc for 100mSec) Input Surge Protection: Designed to meet MIL-STD-1275A/D (100Vdc for 50mSec) Output Selection Guide Single Output Voltages: 12Vdc, 15Vdc, 24Vdc, 28Vdc, 36Vdc, & 48Vdc (Custom output voltages are available, consult factory) DC Output Characteristics (floating) Output Power: 300 watts (maximum continuous power, may require derating for some low voltage outputs) Line Regulation: ±2.0% Typical Load Regulation: ±2.0% Typical (No load to full load; nominal input) Output Ripple/Noise: 1% Typical (pk-pk; nominal input; full load; 20MHz bandwidth) Set Point Accuracy: ±1.0% of Output Voltage (Nominal input; full load; 25°C) Transient Response: Output voltage returns to within 1% in less than 2.5mS for a 50% load change and the peak transient does not excess 5% Overshoot: Turn-on and turn-off overshoot should not exceed 5% over nominal voltage Electrical Characteristics Switching Frequency: 200KHz Fixed Efficiency: 88% Typical (Measuring at 115Vac and at full load) Turn On Delay: 250 to 500mS (To nominal output voltage) Isolation Voltage: Input to Output: 3000VAC Input to Chassis: 1500VAC (30 seconds) Output to Chassis: 500Vdc Isolation Resistance: 100Mohms (Input to output) Temperature Regulation: +/- 0.005%/degree C (+/- 2% Maximum over operating temp range) Protection Over Current Limit: 115 to 130%. Auto-recovery after removal of overload condition Over-Voltage Setpoint: 108 to 125% of output voltage. Unit latched 1 minute, recycle AC input to reset Short Circuit: Auto-recovery after short circuit condition is removed Over Temperature Protection: The power supply is protected for over temperature conditions with thermal shutdown. Auto-Recovery when temperature returns to normal Environmental Operating Temperature: -40º to +85ºC (baseplate) Storage Temperature: -50º to +100ºC Operating Humidity: 5% to 95%, non-condensing Storage Humidity: 5% to 95%, non-condensing Operating Altitude: Sea-level to 10,000 ft. Shock & Vibration: Designed to meet MIL-STD-810H EMC Radiated & Conducted EMI: Designed to meet EN55022 Level B, CISPR 22 and FCC (Part J) Class B Cooling Conduction Cooling: Baseplate not to exceed +85ºC for full rated output Mechanical Enclosure: Metal chassis, aluminum baseplate and enclosure, non-finish Outline Dimensions: 6.5" X 8.7" X 3.0" (W X L X H) – Excluding I/O connector Weight: 4.5 lbs. AC Input Connector (J1): Amphenol PN RT07144PNH DC Output Connector (J2): Amphenol PN RT07144SNH Optional Features, Controls or Alarms Consult factory Note Product specifications subject to change without notice https://www.dscpower.com/mgps-3p-500-watt-aerospace-power-supply daily 0.75 2025-07-14 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/cd4d5858-c807-44d7-8955-582828a365d2/MGPS500-3P-XX-Single-Output-Military-Grade-Power-Supply.jpg MGPS-3P 500 Watt Aerospace Power Supply - MGPS500-3P-XX: Three Phase Series, Aerospace Power Supply Product Specification Product Description This product is a 500 watt, single output, military grade power supply designed for electronic systems operating in harsh environments under severe temperature conditions. It is intended for aerospace operations that utilize a 3 phase, 400Hz, AC power sources and designed to meet applicable military standards for airborne applications. Product Features Meets MIL-STD-461/704/810 Frequency Range: 360 to 440Hz Operating Temperature Range: -40º to +85ºC Conduction Cooled, Baseplate Mounting AC Input Voltage Input Range: 95-138Vac (115VAC nominal) Frequency: 400Hz (360-440Hz) Phase: Three Phase, 3 wire plus ground Power Factor Correction: 0.95 min @ 115Vac, full load Input Transient Protection: Designed to meet MIL-STD-704A/D (80Vdc for 100mSec) Input Surge Protection: Designed to meet MIL-STD-1275A/D (100Vdc for 50mSec) Output Selection Guide Single Output Voltages: 12Vdc, 24Vdc, 28Vdc, & 48Vdc (Custom output voltages are available, consult factory) DC Output Characteristics (floating) Output Power: 500 watts (maximum continuous power, may require derating for some low voltage outputs) Line Regulation: ±2.0% Typical Load Regulation: ±2.0% Typical (No load to full load; nominal input) Output Ripple/Noise: 1% Typical (pk-pk; nominal input; full load; 20MHz bandwidth) Set Point Accuracy: ±1.0% of Output Voltage (Nominal input; full load; 25°C) Transient Response: Output voltage returns to within 1% in less than 2.5mS for a 50% load change and the peak transient does not excess 5% Overshoot: Turn-on and turn-off overshoot should not exceed 5% over nominal voltage Electrical Characteristics Switching Frequency: 250KHz Fixed Efficiency: 88% Typical (Measuring at 115Vac and at full load) Turn On Delay: 250 to 500mS (To nominal output voltage) Isolation Voltage: Input to Output: 3000VAC Input to Chassis: 1500VAC (30 seconds) Output to Chassis: 500Vdc Isolation Resistance: 100Mohms (Input to output) Temperature Regulation: +/- 0.005%/degree C (+/- 2% Maximum over operating temp range) Protection Over Current Limit: 115 to 130%. Auto-recovery after removal of overload condition Over-Voltage Setpoint: 108 to 125% of output voltage. Unit latched 1 minute, recycle AC input to reset Short Circuit: Auto-recovery after short circuit condition is removed Over Temperature Protection: The power supply is protected for over temperature conditions with thermal shutdown. Auto-Recovery when temperature returns to normal Environmental Operating Temperature: -40º to +85ºC (baseplate) Storage Temperature: -50º to +100ºC Operating Humidity: 5% to 90%, non-condensing Storage Humidity: 5% to 95%, non-condensing Operating Altitude: Sea-level to 40,000 ft. Shock & Vibration: Designed to meet MIL-STD-810H EMC Radiated & Conducted EMI: Designed to meet MIL-STD-461F/G Cooling Conduction Cooling: Baseplate not to exceed +85ºC for full rated output Mechanical Enclosure: Metal chassis, aluminum baseplate and enclosure, non-finish Outline Dimensions: 2.6" X 7.5" X 11.0" (H X W X L) – not including I/O connector Weight: 5.0 lbs. AC Input Connector: D38999 or EQ. DC Output Connector: D38999 or EQ. Optional Features, Controls or Alarms Consult factory Note Product specifications subject to change without notice https://www.dscpower.com/military-dc-to-dc-converters daily 0.75 2026-03-16 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/ffd98050-62d2-4886-8075-8d997460ac82/MGDC150-mil-std-DC-to-DC-Converter.jpg Military DC to DC Converters - 150 Watt - Mil-Grade DC to DC Converter, Product Features: Designed to Meet: MIL-STD-461/704/810/1275 Input: 28V or 48Vdc (Nominal) Operating Temp Range: -40º to +85ºC Conduction Cooled, Baseplate Mounted https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/ce552a6a-cb03-437e-be38-d194a4b391aa/MGDC300-MIL-STD-DC-to-DC-Converter.jpg Military DC to DC Converters - 300 Watt - Mil-Grade DC to DC Converter, Product Features: Designed to Meet: MIL-STD-461/704/810/1275 Input: 28V or 48Vdc (Nominal) Operating Temp Range: -40º to +85ºC Conduction Cooled, Baseplate Mounted https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/a4b5aaf8-8a82-4a9d-b515-23eb8d92884d/MGDC500-MIL-STD-DC-to-DC-Converter.jpg Military DC to DC Converters - 500 Watt - Mil-Grade DC to DC Converter, Product Features: Designed Meet: MIL-STD-461/704/810/1275 Input: 28V or 48Vdc (Nominal) Operating Temp Range: -40º to +85ºC Conduction Cooled, Baseplate Mounted https://www.dscpower.com/custom-power-supplies daily 0.75 2026-03-26 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/56f74617-c8dc-44f1-b4df-ffe7a1756e47/custom-2400-watt-navy-shipboard-power-supply.jpg Custom Power Supplies - 2400 Watt, Custom Navy 901 Military Power Supply Designed for Navy Surveillance Application Meets MIL-STD-461/704/810/1399 Universal Input: 90-264Vac, 1 phase, 50/60/400Hz Output: 48Vdc @ 2400W https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/fa677ce4-e94a-47a1-8201-4d146872d3cf/EXP1000-Series-1000-Watt-External-Power-Supply.jpg Custom Power Supplies - 1000 Watt, Custom Designed External Power Supply -20°C to 50°C - Ambient Temperature Range cULus & CB Scheme Certifications EMC Immunity – Railroad & Maritime MIL-STD-810G Shock & Vibration https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/b8b08204-1809-4e5d-9496-c7e3497e45b5/2000-watt-custom-navy-901-shipboard-power-supply.jpg Custom Power Supplies - 2000 Watt, Custom Navy 901 Military Power Supply Designed for Navy Satcom Application Meets MIL-STD-461/704/810/901/1399 Universal Input: 90-264Vac, 1 phase, 50/60/400Hz Output: 28Vdc @ 2000W https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/c6fb5a04-c198-4800-a840-ddf4c0483357/1500-watt-custom-miltary-power-supply.jpg Custom Power Supplies - 1500 Watt, Custom Military Power Supply Designed for Military Helicopter Application Meets MIL-STD-461/704/810/1275 Universal Input: 90-264Vac, 1 phase, 50/60/400Hz Output: 5Vdc @ 500W & 28Vdc @ 1000W https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/441c0ab5-3e77-48ce-91db-0a5d216359c6/300-watt-custom-IP67-industrial-grade-power-supply.jpg Custom Power Supplies - 300 Watt, Custom IP67 Industrial Power Supply Designed for Remote Communications Equipment Meets IP67 Ingress Universal Input: 90-264Vac, 1 phase, 50/60/400Hz Output: 24Vdc @ 300 Watts https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/2778e6e3-65b0-435c-bed6-afa2ee4f001a/2000-watt-custom-miltary-aircraft-power-supply.jpg Custom Power Supplies - 2000 Watt, Custom Military Aircraft Power Supply Designed for Military Aircraft Meets MIL-STD-461/704/810/1275 Input: 115Vac, 3 phase, 400Hz Output: 28Vdc @ 2000 Watts https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/80026551-f02a-48c7-a920-a002ec74d08a/4000-watt-custom-wind-turbine-control-power-supply.jpg Custom Power Supplies - 4000 Watt, Custom Wind Turbine Control Power Supply Designed for Steady Vibration Redundant 3-Phase Input Section Lightening & Magnetic Field Protection Custom CAN bus Communication https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/76d59ccb-8069-42cf-b37c-4e8b8fcaf5ad/dc-input-atx-blade-server-power-supply.jpg Custom Power Supplies - DC Input, ATX Power Supply for Blade Server Designed for N+1, Hot Swap Function Nominal Input: 12Vdc (10.5 to 14Vdc) Regulated ATX Outputs & 5V Stby 1200 Watts, 12 Volt Pass Through https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/8e43f29a-53e5-4652-9096-da91c6b4a147/60-watt-DO-160-cabin-lighting-power-supply.jpg Custom Power Supplies - 60 Watt, DO-160 for Aircraft Cabin Lighting Designed to AD0100 & RTCA/DO-160 Wide Frequency Range: 360 - 800Hz Operating Temp Range: -15°C to +55°C Integrated RS-485 & CAN bus Boards https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/59dca05d-f677-4de4-9cb9-e7c3a843e394/270vdc-input-military-grade-500-watt-dc-to-dc-converter.jpg Custom Power Supplies - 270VDC Input, 500 Watt, DC to DC Converter Application: Military Aircraft Meets MIL-STD-461/704/810/1275 Baseplate Temp: -40°C to +85°C Output: 28Vdc @ 500 Watts https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/dc98e1ed-5b3b-463a-9891-5d0a7e2ef4d1/custom-military-power-supply-1000-watt-ac-to-.jpg Custom Power Supplies - Military Power Supply, 1000 Watts, Sealed Chassis Application: Military UHF Communications Radio Meets MIL-STD-461/704/810/1275 Convection Cooled Output: 28Vdc @ 1000 Watts https://www.dscpower.com/fsak-1000-watt-atx-industrial-power-supply daily 0.75 2025-07-24 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/b1e211a5-a07b-4ccd-a26b-d2610f8da166/FSAK1000P-1000-Watt-ATX-Industrial-Computer-Power-Supply.jpg FSAK 1000 Watt ATX Industrial Power Supply - FSAK1000P-XX: 1000 Watt, ATX Industrial Computer Power Supply Product Specification Product Description This 1000 watt, ATX power supply has customizable outputs to provide the OEM flexibility to custom tailor output loads to better fit their system’s power needs. This unique design offers up to 8 outputs (plus 5V standby) in which outputs can be paralleled to provide increased current for individual voltage rails. There is even a 24Vdc output to meet CompactPCI and VME platform requirements. Product Features Configurable Outputs for Load Flexibility Up to 8 Outputs with 5V Standby Optional Output Voltages: 3.3V, 5V, 12V, & 24V Industry Standard PS/2 Form Factor AC Input Voltage Input Range: 90-264Vac Frequency Range: 47-63Hz Phase: Single Phase Typical Input Current: 105A at 115Vac input, full load Power Factor Correction: 0.95 min @ 115Vac, full load Typical Leakage Current: 700uA at 240Vac https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/1599237008436-1QQ48ETBVQ1RC66NRS39/FSAK1000P+Output+Selection+Matrix.jpg FSAK 1000 Watt ATX Industrial Power Supply Output Selection Guide Notes: 1. Total continuous combined output(s) wattage: 1000W. 2. Minimum load of 0.5A on V1, no minimum load required on other outputs. 3. Maximum combined current for V1 & V1a: 83A. 4. Maximum combined current for V2 & V3: 170W. 5. V1a is isolated from main outputs by inductor as source of system fans. 6. All output rails could be optional except got 12V (V1). https://www.dscpower.com/ip67-500-watt-industrial-power-supply daily 0.75 2025-07-14 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/49afdfe1-5ce7-4047-8c77-bf0336df7147/IP67IPS500-XX-Single-Output-Industrial-Grade-Power-Supply.jpg IP67 500 Watt Industrial Power Supply - IP67IPS500-XX: Single Phase, Industrial Grade Power Supply Product Specification Product Description This product is a 500 watt, single output, industrial grade power supply designed for electronic systems operating in demanding environments with adverse temperature conditions. It is a single phase, AC input power supply enclosed in an IP66 rated chassis for remote operations requiring the highest degree of reliability. Product Features Designed to meet IECEX/ATEX/NRTL/CE IP66 Rated Chassis Operating Temperature Range: -40º to +85ºC Baseplate Mounting, Conduction Cooled AC Input Voltage Input Range: 90-264Vac Frequency: 50/60/400Hz (47-440Hz) Phase: Single Phase, 2 wire plus ground Power Factor Correction: 0.95 min @ 115Vac, full load Input Transient Protection: Designed to meet MIL-STD-704A/D (80Vdc for 100mSec) Input Surge Protection: Designed to meet MIL-STD-1275A/D (100Vdc for 50mSec) Output Selection Guide Single Output Voltages: 12Vdc, 15Vdc, 24Vdc, 28Vdc, 36Vdc, & 48Vdc (Custom output voltages are available, consult factory) DC Output Characteristics (floating) Output Power: 500 watts (maximum continuous power, may require derating for some low voltage outputs) Line Regulation: ±2.0% Typical Load Regulation: ±2.0% Typical (No load to full load; nominal input) Output Ripple/Noise: 1% Typical (pk-pk; nominal input; full load; 20MHz bandwidth) Set Point Accuracy: ±1.0% of Output Voltage (Nominal input; full load; 25°C) Transient Response: Output voltage returns to within 1% in less than 2.5mS for a 50% load change and the peak transient does not excess 5% Overshoot: Turn-on and turn-off overshoot should not exceed 5% over nominal voltage Electrical Characteristics Switching Frequency: 200KHz Fixed Efficiency: 88% Typical (Measuring at 115Vac and at full load) Turn On Delay: 250 to 500mS (To nominal output voltage) Isolation Voltage: Input to Output: 3000VAC Input to Chassis: 1500VAC (30 seconds) Output to Chassis: 500Vdc Isolation Resistance: 100Mohms (Input to output) Temperature Regulation: +/- 0.005%/degree C (+/- 2% Maximum over operating temp range) Protection Over Current Limit: 115 to 130%. Auto-recovery after removal of overload condition Over-Voltage Setpoint: 108 to 125% of output voltage. Unit latched 1 minute, recycle AC input to reset Short Circuit: Auto-recovery after short circuit condition is removed Over Temperature Protection: The power supply is protected for over temperature conditions with thermal shutdown. Auto-Recovery when temperature returns to normal Environmental Operating Temperature: -40º to +85ºC (baseplate) Storage Temperature: -50º to +100ºC Operating Humidity: 10% to 95%, non-condensing Storage Humidity: 5% to 95%, non-condensing Operating Altitude: Sea-level to 10,000 ft. Shock & Vibration: Designed to meet MIL-STD-810G EMC Radiated & Conducted EMI: Designed to meet EN55022 Level B, CISPR 22 and FCC (Part J) Class B Cooling Conduction Cooling: Baseplate not to exceed +85ºC for full rated output Mechanical Enclosure: Metal chassis, aluminum baseplate and enclosure, anodized finish Outline Dimensions: 6.5" X 8.7" X 3.0" (W X L X H) – Excluding I/O connectors Weight: 4.5 lbs. (1587 grams) AC Input Connector (J1): Amphenol PN RT07144PNH DC Output Connector (J2): Amphenol PN RT07144SNH Optional Features, Controls or Alarms Consult factory Note Product specifications subject to change without notice https://www.dscpower.com/fsak-660-watt-atx-industrial-power-supply daily 0.75 2025-07-24 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/0939f5fd-3337-4d44-9728-9ed5e2b2bc8c/FSAK660P-660-Watt-ATX-Industrial-Computer-Power-Supply.jpg FSAK 660 Watt ATX Industrial Power Supply - FSAK660P-XX: 660 Watt, ATX Industrial Computer Power Supply Product Specification Product Description This 660 watt, ATX power supply has customizable outputs to provide the OEM flexibility to custom tailor output loads to better fit their system’s power needs. This unique design offers up to 8 outputs (plus 5V standby) in which outputs can be paralleled to provide increased current for individual voltage rails. There is even a 24Vdc output to meet CompactPCI and VME platform requirements. Product Features Configurable Outputs for Load Flexibility Up to 8 Outputs with 5V Standby Output Options: 3.3V, 5V, 12V, & 24V Industry Standard PS/2 Form Factor AC Input Voltage Input Range: 90-264Vac Frequency Range: 47-63Hz Phase: Single Phase Typical Input Current: 7.1A at 115Vac input, full load Power Factor Correction: 0.95 min @ 115Vac, full load Typical Leakage Current: 700uA at 240Vac https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/1599157568837-0S5NNL8OY4NKQFZ17F16/FSAK660P+Output+Selection+Matrix.png FSAK 660 Watt ATX Industrial Power Supply Output Selection Guide Notes: 1. Total continuous combined output(s) wattage: 660W. 2. Minimum load of 0.5A on V1, no minimum load required on other outputs. 3. Maximum combined current for V1 & V1a: 55A. 4. Maximum combined current for V2 & V3: 170W. 5. V1a is isolated from main outputs by inductor as source of system fans. 6. All output rails could be optional except got 12V (V1). https://www.dscpower.com/fsak-1200-watt-atx-industrial-power-supply daily 0.75 2025-07-24 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/c4243261-62fd-44da-b093-c17b2b250c38/FSAK1200P-1200-Watt-ATX-Industrial-Computer-Power-Supply.jpg FSAK 1200 Watt ATX Industrial Power Supply - FSAK1200P-XX: 1200 Watt, ATX Industrial Computer Power Supply Product Specification Product Description This 1200 watt, ATX power supply has customizable outputs to provide the OEM flexibility to custom tailor output loads to better fit their system’s power needs. This unique design offers up to 8 outputs (plus 5V standby) in which outputs can be paralleled to provide increased current for individual voltage rails. There is even a 24Vdc output to meet CompactPCI and VME platform requirements. Product Features Configurable Outputs for Load Flexibility Up to 8 Outputs with 5V Standby Optional Output Voltages: 3.3V, 5V, 12V, & 24V Industry Standard PS/2 Form Factor AC Input Voltage Input Range: 90-264Vac Frequency Range: 47-63Hz Phase: Single Phase Typical Input Current: 12.9A at 115Vac input, full load Power Factor Correction: 0.95 min @ 115Vac, full load Typical Leakage Current: 700uA at 240Vac https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/1599237169897-ZEMYS9GUS8PPRE0EMN08/FSAK1200P+Output+Selection+Matrix.jpg FSAK 1200 Watt ATX Industrial Power Supply Output Selection Guide Notes: 1. Total continuous combined output(s) wattage: 1200W. 2. Minimum load of 0.5A on V1, no minimum load required on other outputs. 3. Maximum combined current for V1 & V1a: 100A. 4. Maximum combined current for V2 & V3: 180W. 5. V1a is isolated from main outputs by inductor as source of system fans. 6. All output rails could be optional except got 12V (V1). https://www.dscpower.com/ip67-1000-watt-industrial-power-supply daily 0.75 2025-07-14 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/ccd0545a-3f9c-4088-ba95-dd20f81af548/IP67IPS1000-XX-Single-Output-Industrial-Grade-Power-Supply.jpg IP67 1000 Watt Industrial Power Supply - IP67IPS1000-XX: Single Phase, Industrial Grade Power Supply Product Specification Product Description This product is a 1000 watt, single output, industrial grade power supply designed for electronic systems operating in demanding environments with adverse temperature conditions. It is a single phase, AC input power supply enclosed in an IP66 rated chassis for remote operations requiring the highest degree of reliability. Product Features Designed to meet IECEX/ATEX/NRTL/CE IP66 Rated Chassis Operating Temperature Range: -40º to +85ºC Conduction Cooled, Baseplate Mounting AC Input Voltage Input Range: 90-264Vac Frequency: 50/60/400Hz (47-440Hz) Phase: Single Phase, 2 wire plus ground Power Factor Correction: 0.95 min @ 115Vac, full load Input Transient Protection: Designed to meet MIL-STD-704A/D (80Vdc for 100mSec) Input Surge Protection: Designed to meet MIL-STD-1275A/D (100Vdc for 50mSec) Output Selection Guide Single Output Voltages: 12Vdc, 15Vdc, 24Vdc, 28Vdc, 36Vdc, & 48Vdc (Custom output voltages are available, consult factory) DC Output Characteristics (floating) Output Power: 1000 watts (maximum continuous power, may require derating for some low voltage outputs) Line Regulation: ±2.0% Typical Load Regulation: ±2.0% Typical (No load to full load; nominal input) Output Ripple/Noise: 1% Typical (pk-pk; nominal input; full load; 20MHz bandwidth) Set Point Accuracy: ±1.0% of Output Voltage (Nominal input; full load; 25°C) Transient Response: Output voltage returns to within 1% in less than 2.5mS for a 50% load change and the peak transient does not excess 5% Overshoot: Turn-on and turn-off overshoot should not exceed 5% over nominal voltage Electrical Characteristics Switching Frequency: 100KHz Fixed Efficiency: 88% Typical (Measuring at 115Vac and at full load) Turn On Delay: 250 to 500mS (To nominal output voltage) Isolation Voltage: Input to Output: 3000VAC Input to Chassis: 1500VAC (30 seconds) Output to Chassis: 500Vdc Isolation Resistance: 100Mohms (Input to output) Temperature Regulation: +/- 0.005%/degree C (+/- 2% Maximum over operating temp range) Protection Over Current Limit: 115 to 130%. Auto-recovery after removal of overload condition Over-Voltage Setpoint: 108 to 125% of output voltage. Unit latched 1 minute, recycle AC input to reset Short Circuit: Auto-recovery after short circuit condition is removed Over Temperature Protection: The power supply is protected for over temperature conditions with thermal shutdown. Auto-Recovery when temperature returns to normal Environmental Operating Temperature: -40º to +85ºC (baseplate) Storage Temperature: -50º to +100ºC Operating Humidity: 10% to 95%, non-condensing Storage Humidity: 5% to 95%, non-condensing Operating Altitude: Sea-level to 10,000 ft. Shock & Vibration: Designed to meet MIL-STD-810H EMC Radiated & Conducted EMI: Designed to meet EN55022 Level B, CISPR 22 and FCC (Part J) Class B Cooling Conduction Cooling: Baseplate not to exceed +85ºC for full rated output Mechanical Enclosure: Metal chassis, aluminum baseplate and enclosure, non-finish Outline Dimensions: 8.0" X 12.0" X 6.0" (W X L X H) – not including I/O connector Weight: 9.0 lbs. AC Input Connector (J1): Amphenol PN RT07144PNH DC Output Connector (J2): Amphenol PN RT07144SNH Optional Features, Controls or Alarms Consult factory Note Product specifications subject to change without notice https://www.dscpower.com/agps-100-watt-do160-power-supply daily 0.75 2026-03-25 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/33b01519-1df1-4d47-ba3d-234c8800845d/AGPS100-1P-XX-Single-Output-DO-160-Grade-Power-Supply.jpg AGPS 100 Watt DO-160 Power Supply - AGPS100-1P-XX: DO-160 Grade, Single Phase, Power Supply Product Specification Product Description This product is a 100 watt, single output, DO-160 grade, power supply designed for electronic systems operating in avionics environments. This power supply includes an active PFC input section and an EMI filtering stage to meet power quality requirements for Boeing and Airbus aircraft operations. Product Features Designed to Meet RTCA/DO-160 Power Requirements Operating Temperature Range: -40º to +85ºC Baseplate Mounting, Conduction Cooled AC Input Voltage Input Range: 90-134Vac (115Vac nominal) Frequency Range: 360-440Hz (Optional 360-800Hz) Phase: Single Phase, 2 wire plus ground Power Factor Correction: 0.95 min @ 115Vac, full load Input Power Compliance: Designed to meet RTCA/DO-160F, Section 16 Voltage Spike Immunity: Designed to meet RTCA/DO-160F, Section 17 Output Selection Guide Single Output Voltages: 12Vdc, 24Vdc, 28Vdc, & 48Vdc (Custom output voltages are available, consult factory) DC Output Characteristics (floating) Output Power: 100 watts (maximum continuous power, may require derating for some low voltage outputs) Line Regulation: ±2.0% Typical Load Regulation: ±2.0% Typical (No load to full load; nominal input) Output Ripple/Noise: 1% Typical (pk-pk; nominal input; full load; 20MHz bandwidth) Set Point Accuracy: ±1.0% of Output Voltage (Nominal input; full load; 25°C) Transient Response: Output voltage returns to within 1% in less than 2.5mS for a 50% load change and the peak transient does not excess 5% Overshoot: Turn-on and turn-off overshoot should not exceed 5% over nominal voltage Electrical Characteristics Switching Frequency: 250KHz Fixed Efficiency: 87% Typical (Measuring at 115Vac and at full load) Turn On Delay: 250 to 500mS (To nominal output voltage) Isolation Voltage: Input to Output: 3000VAC Input to Chassis: 1500VAC Output to Chassis: 500Vdc Isolation Resistance: 100Mohms (Input to output) Temperature Regulation: ±0.005%/degree C (±2% Maximum over operating temp range) Protection Over Current Limit: 115 to 130%. Auto-recovery after removal of overload condition Over-Voltage Setpoint: 108 to 125% of output voltage. Unit latched 1 minute, recycle AC input to reset Short Circuit: Auto-recovery after short circuit condition is removed Over Temperature Protection: The power supply is protected for over temperature conditions with thermal shutdown. Auto-Recovery when temperature returns to normal Environmental Operating Temperature: -40º to +85ºC (baseplate) Storage Temperature: -50º to +100ºC Operating Humidity: 10% to 95%, non-condensing Storage Humidity: 5% to 95%, non-condensing Operating Altitude: Sea-level to 40,000 ft. Shock & Vibration: Designed to meet RTCA/DO-160 Section 7, Cat B & Section 8, Category Z, Curve B RF Susceptibility (Conducted & Radiated): Designed to meet RTCA/DO-160, Section 20, Category M Emissions (Conducted & Radiated): Designed to meet RTCA/DO-160, Section 21, Category M Cooling Conduction Cooling: Baseplate not to exceed +85ºC for full rated output Mechanical Enclosure: Metal chassis, aluminum baseplate and enclosure, non-finish or optional coatings Outline Dimensions: 5.0" X 8.0" X 2.5" (W X L X H) – excluding I/O connectors Weight: 3.5 lbs. AC Input Connector (J1): D-Sub Type or EQ. DC Output Connector (J2): D-Sub Type or EQ. Optional Features, Controls or Alarms Consult factory Note Product specifications subject to change without notice https://www.dscpower.com/mgps-3p-2400-watt-aerospace-power-supply daily 0.75 2025-07-14 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/5682a937-792b-4ab7-9bba-b4a7d19b797b/MGPS2400-3P-XX-Single-Output-Military-Grade-Power-Supply.jpg MGPS-3P 2400 Watt Aerospace Power Supply - MGPS2400-3P-XX: Three Phase Series, Aerospace Power Supply Product Specification Product Description This product is a 2400 watt, single output, military grade power supply designed for electronic systems operating in harsh environments under severe temperature conditions. It is intended for aerospace operations that utilize a 3 phase, 400Hz, AC power sources and designed to meet applicable military standards for airborne applications. Product Features Meets MIL-STD-461/704/810 Wide Frequency Range: 360 to 440Hz Operating Temperature Range: -40º to +85ºC Conduction Cooled, Baseplate Mounting AC Input Voltage Input Range: 95-138VAC (115VAC nominal) Frequency: 400Hz (360-440Hz) Phase: Three Phase, 3 wire plus ground Power Factor Correction: 0.95 min @ 115Vac, full load Input Transient Protection: Designed to meet MIL-STD-704A/D (80Vdc for 100mSec) Input Surge Protection: Designed to meet MIL-STD-1275A/D (100Vdc for 50mSec) Output Selection Guide Single Output Voltages: 12Vdc, 24Vdc, 28Vdc, & 48Vdc (Custom output voltages are available, consult factory) DC Output Characteristics (floating) Output Power: 2400 watts (maximum continuous power, may require derating for some low voltage outputs) Line Regulation: ±2.0% Typical Load Regulation: ±2.0% Typical (No load to full load; nominal input) Output Ripple/Noise: 1% Typical (pk-pk; nominal input; full load; 20MHz bandwidth) Set Point Accuracy: ±1.0% of Output Voltage (Nominal input; full load; 25°C) Transient Response: Output voltage returns to within 1% in less than 2.5mS for a 50% load change and the peak transient does not excess 5% Overshoot: Turn-on and turn-off overshoot should not exceed 5% over nominal voltage Electrical Characteristics Switching Frequency: 250KHz Fixed Efficiency: 88% Typical (Measuring at 115Vac and at full load) Turn On Delay: 250 to 500mS (To nominal output voltage) Isolation Voltage: Input to Output: 3000VAC Input to Chassis: 1500VAC (30 seconds) Output to Chassis: 500Vdc Isolation Resistance: 100Mohms (Input to output) Temperature Regulation: +/- 0.005%/degree C (+/- 2% Maximum over operating temp range) Protection Over Current Limit: 115 to 130%. Auto-recovery after removal of overload condition Over-Voltage Setpoint: 108 to 125% of output voltage. Unit latched 1 minute, recycle AC input to reset Short Circuit: Auto-recovery after short circuit condition is removed Over Temperature Protection: The power supply is protected for over temperature conditions with thermal shutdown. Auto-Recovery when temperature returns to normal Environmental Operating Temperature: -40º to +85ºC (baseplate) Storage Temperature: -50º to +100ºC Operating Humidity: 10% to 95%, non-condensing Storage Humidity: 5% to 95% RH, Non-condensing Operating Altitude: Sea-level to 40,000 ft. Shock & Vibration: Designed to meet MIL-STD-810H EMC Radiated & Conducted EMI: Designed to meet MIL-STD-461F/G Cooling Conduction Cooling: Baseplate not to exceed +85ºC for full rated output Mechanical Enclosure: Metal chassis, aluminum baseplate and enclosure, Black-finish Outline Dimensions: 2.65” X 8.0" X 14.0" (H X W X L) – Excluding I/O connectors Weight: 9.5 lbs. AC Input Connector (J1): ITT Cannon PN: DBMMD5W5P DC Output Connector (J2): ITT Cannon PN: DBMMD9H4SJ Optional Features, Controls or Alarms Consult factory Note Product specifications subject to change without notice https://www.dscpower.com/industrial-power-supplies daily 0.75 2025-07-15 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/d7410f02-de94-4bed-b697-f58d617984e3/Industrial-Power-Supply-Single-Phase-300-Watt-IP67-Series.jpg Industrial Power Supplies - 300 Watt - IP67 Series Product Features: Designed to meet IECEX/ATEX/NRTL/CE IP66 Rated Chassis & Connectors Operating Temp Range: -40º to +85ºC Input: 90-264Vac, Single Phase https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/7a5a4861-39a2-4b66-b226-137eaacbfc50/Industrial-Power-Supply-Single-Phase-500-Watt-IP67-Series.jpg Industrial Power Supplies - 500 Watt - IP67 Series Product Features: Designed to meet IECEX/ATEX/NRTL/CE IP66 Rated Chassis & Connectors Operating Temp Range: -40º to +85ºC Input: 90-264Vac, Single Phase https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/4aa3fc3f-d84c-4dcf-8be9-2188d9e7c3ec/Industrial-Power-Supply-Single-Phase-1000-Watt-IP67-Series.jpg Industrial Power Supplies - 1000 Watt - IP67 Series Product Features: Designed to meet IECEX/ATEX/NRTL/CE IP66 Rated Chassis & Connectors Operating Temp Range: -40º to +85ºC Input: 90-264Vac, Single Phase https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/93f93425-8737-4f7a-8697-e260ff60f6b0/Industrial-Power-Supply-Single-Phase-1400-Watt-IP67-Series.jpg Industrial Power Supplies - 1400 Watt - IP67 Series Product Features: Designed to meet IECEX/ATEX/NRTL/CE IP66 Rated Chassis & Connectors Operating Temp Range: -40º to +85ºC Input: 90-264Vac, Single Phase https://www.dscpower.com/agps-50-watt-do160-power-supply daily 0.75 2026-01-14 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/170c7cbc-8f07-4de8-a197-4a93373bbb6d/AGPS50-1P-XX-Single-Output-DO-160-Grade-Power-Supply.jpg AGPS 50 Watt DO-160 Power Supply - AGPS50-1P-XX: DO-160 Grade, Single Phase, Power Supply Product Specification Product Description This product is a 50 watt, single output, DO-160 grade, power supply designed for electronic systems operating in avionics environments. This power supply includes an active PFC input section and an EMI filtering stage to meet power quality requirements for Boeing and Airbus aircraft operations. Product Features Designed to Meet RTCA/DO-160 Power Requirements Operating Temperature Range: -40º to +85ºC Baseplate Mounting, Conduction Cooled AC Input Voltage Input Range: 90-134Vac (115Vac nominal) Frequency Range: 360-440Hz (400Hz nominal) Phase: Single Phase, 2 wire plus ground Power Factor Correction: 0.95 min @ 115Vac, full load Input Power Compliance: Designed to meet RTCA/DO-160F, Section 16 Voltage Spike Immunity: Designed to meet RTCA/DO-160F, Section 17 Output Selection Guide Single Output Voltages: 12Vdc, 24Vdc, 28Vdc, & 48Vdc (Custom output voltages are available, consult factory) DC Output Characteristics (floating) Output Power: 50 watts (maximum continuous power, may require derating for some low voltage outputs) Line Regulation: ±2.0% Typical Load Regulation: ±2.0% Typical (No load to full load; nominal input) Output Ripple/Noise: 1% Typical (pk-pk; nominal input; full load; 20MHz bandwidth) Set Point Accuracy: ±1.0% of Output Voltage (Nominal input; full load; 25°C) Transient Response: Output voltage returns to within 1% in less than 2.5mS for a 50% load change and the peak transient does not excess 5% Overshoot: Turn-on and turn-off overshoot should not exceed 5% over nominal voltage Electrical Characteristics Switching Frequency: 250KHz Fixed Efficiency: 88% Typical. Measuring at 115Vac and at full load (85% typical for 12V output model) Turn On Delay: 250 to 500mS (To nominal output voltage) Isolation Voltage: Input to Output: 3000VAC Input to Chassis: 1500VAC (30 seconds) Output to Chassis: 500Vdc Isolation Resistance: 100Mohms (Input to output) Temperature Regulation: ±0.005%/degree C (±2% Maximum over operating temp range) Protection Over Current Limit: 115 to 130%. Auto-recovery after removal of overload condition Over-Voltage Setpoint: 108 to 125% of output voltage. Unit latched 1 minute, recycle AC input to reset Short Circuit: Auto-recovery after short circuit condition is removed Over Temperature Protection: The power supply is protected for over temperature conditions with thermal shutdown. Auto-Recovery when temperature returns to normal Environmental Operating Temperature: -40º to +85ºC Storage Temperature: -50º to +100ºC Operating Humidity: 10% to 95%, non-condensing Storage Humidity: 5% to 95%, non-condensing Operating Altitude: Sea-level to 15,000 ft. Shock & Vibration: Designed to meet RTCA/DO-160 Section 7, Cat B & Section 8, Category Z, Curve B RF Susceptibility (Conducted & Radiated): Designed to meet RTCA/DO-160, Section 20, Category M Emissions (Conducted & Radiated): Designed to meet RTCA/DO-160, Section 21, Category M Cooling Conduction Cooling: Baseplate not to exceed +75ºC for full rated output Mechanical Enclosure: Metal chassis, aluminum baseplate and enclosure, black finish Outline Dimensions: 4.3" X 7.1" X 2.0" (W X L X H) – Excluding I/O connectors Weight: 1.4 lbs. AC Input Connector (J1): Circular Conn Amphenol SJS840330 DC Output Connector (J2): High Density D-Sub. Optional Features, Controls or Alarms Consult factory Note Product specifications subject to change without notice https://www.dscpower.com/semi-custom-power-supplies daily 0.75 2025-07-29 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/1d196fad-da27-4e7a-a29c-a319d50856a0/4000-Watt-Mil-Grade-Rack-Mount-Power-Supply-System.jpg Semi-Custom & Modified Standards - 4000 Watt, Military Grade, Rack Mount Power Supply Designed to Meet MIL-STD-461/702/810 Input: 90-240Vac, 50/60Hz, Single Phase 19” Rack Mount Chassis Dual, Isolated, 28Vdc Outputs https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/20ef7ced-a39e-454a-8e46-2538b8b6d7f2/2500-Watt-Mil-Grade-Rack-Mount-Power-Supply-System.jpg Semi-Custom & Modified Standards - 2500 Watt, Military Grade, Rack Mount Power Supply Designed to Meet MIL-STD-461/702/810 Input: 90-240Vac, 50/60Hz, Single Phase 19” Rack Mount Chassis Dual, Isolated, 28Vdc Outputs https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/1fd7d6b5-467e-45ff-b57a-3f5e8f4d5640/Semi-Custom-DO-160-Wide-Frequency-Range-Power-Supply.jpg Semi-Custom & Modified Standards - 300 Watt, Wide Frequency Range, Power Supply Designed for ABD0100 & DO-160 Applications Input: 115VAC, 360-800HZ Customized Chassis Conduction Cooled thru Baseplate https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/8d34d9af-2368-49e6-9b59-cec953a0823f/200-Watt-Dual-Input-Industrial-Power-Supply.jpg Semi-Custom & Modified Standards - 200 Watt, Dual Input, Industrial Power Supply Designed for Control System Input – 12Vdc or 115Vac Customized Chassis Conduction Cooled thru Baseplate https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/5ccfc54f-895a-4529-911b-e45b15725281/1U-Hot-Swap-ATX-Power-Supply-Rack-System.jpg Semi-Custom & Modified Standards - 1U, Hot Swap, ATX Power Supply Rack System Designed for 1U Computer Systems Output Power from 750 to 1200 Watts 3.3V, 5V, 12V & 5V Stby - ATX Outputs Active Current Sharing & Isolation https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/204708f7-7ba1-462b-b78e-5c3aba6c1292/500-Watt-IP67-Rated-Power-Supply.jpg Semi-Custom & Modified Standards - 500 Watt, IP67 for Ground Satellite Com Uplink Designed for Remote Operation Sealed, IP67 Rated Enclosure Custom Heatsink for Air Cooling 250K Calculated MTBF BellCore https://www.dscpower.com/fsak-1u-1600-watt-atx-industrial-power-supply daily 0.75 2020-09-17 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/1600351924171-17JMMCBUITSCLCXZKUD1/FSAK-F_1600_Watt_1U_ATX_Industrial_Computer_Power_Supply.jpg FSAK-1U 1600 Watt ATX Industrial Power Supply - FSAK1600F: 1600 Watt, 1U ATX Industrial Computer Power Supply Product Specification Product Description This 1600 watt, 1U ATX industrial computer power supply is designed for applications requiring “hot-swap” capability to provide the OEM with a quick, interchangeable power module or for use in a N+1 redundancy configuration. This design utilizes active current sharing and incorporates OR-ing isolation MOFETS to minimize voltage drop. Product Features Hot Swap, N+1, Parallelable Power Module Single Output: 12V (Optional 24V, 28V, 48V or 56V) Optional N+1 Rack Chassis for up to 3 Power Modules AC Input Voltage Input Range: 200-240Vac Frequency Range: 47-63Hz Phase: Single Phase Typical Input Current: 8.2A at 240Vac input, full load Power Factor Correction: 0.95 min @ 240Vac, full load Typical Leakage Current: 700uA at 240Vac https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/1600109162800-MMC8TFQ6ETWPDBQRPIBK/FASK1600F-1U+Output+Table.png FSAK-1U 1600 Watt ATX Industrial Power Supply Output Table Notes: 1. Total continuous combined output(s) wattage: 1600W. 2. Peak current of 12V is 110% of max rated current up to 15mS at 240Vac nominal input. https://www.dscpower.com/computers-peripherals-link-page daily 0.75 2020-10-08 https://www.dscpower.com/designtechnology-link-page daily 0.75 2021-01-20 https://www.dscpower.com/fsak-1u-850-watt-atx-industrial-power-supply daily 0.75 2020-09-17 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/1600351412083-ASQK1XB44I2M7F0C1OHE/FSAK-F_850_Watt_1U_ATX_Industrial_Computer_Power_Supply.jpg FSAK-1U 850 Watt ATX Industrial Power Supply - FSAK850F: 850 Watt, 1U ATX Industrial Grade Power Supply Product Specification Product Description This 850 watt, 1U ATX industrial computer power supply is designed for applications requiring “hot-swap” capability to provide the OEM with a quick, interchangeable power module or for use in a N+1 redundancy configuration. This design utilizes active current sharing and incorporates OR-ing isolation MOFETS to minimize voltage drop. Product Features Hot Swap, N+1, Parallelable Power Module Single Output: 12V (Optional 24V, 28V, 48V or 56V) Optional N+1 Rack Chassis for up to 3 Power Modules AC Input Voltage Input Range: 90-264Vac Frequency Range: 47-63Hz Phase: Single Phase Typical Input Current: 9.1A at 115Vac input, full load Power Factor Correction: 0.95 min @ 115Vac, full load Typical Leakage Current: 700uA at 240Vac https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/1600109008032-YTGS5B1KWES5TCE7J1WR/FASK850F-1U+Output+Table.jpg FSAK-1U 850 Watt ATX Industrial Power Supply Output Table Notes: 1. Total continuous combined output(s) wattage: 850W. 2. Peak current of 12V is 110% of max rated current up to 15mS at 115Vac nominal input. https://www.dscpower.com/power-trade-journals daily 0.75 2020-09-15 https://www.dscpower.com/fsak-1u-1200-watt-atx-industrial-power-supply daily 0.75 2020-09-17 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/1600351833289-28DV712CVCCEUQ4M3WOY/FSAK-F_1200_Watt_1U_ATX_Industrial_Computer_Power_Supply.jpg FSAK-1U 1200 Watt ATX Industrial Power Supply - FSAK1200F: 1200 Watt, 1U ATX Industrial Grade Power Supply Product Specification Product Description This 1200 watt, 1U ATX industrial computer power supply is designed for applications requiring “hot-swap” capability to provide the OEM with a quick, interchangeable power module or for use in a N+1 redundancy configuration. This design utilizes active current sharing and incorporates OR-ing isolation MOFETS to minimize voltage drop. Product Features Hot Swap, N+1, Parallelable Power Module Single Output: 12V (Optional 24V, 28V, 48V or 56V) Optional N+1 Rack Chassis for up to 3 Power Modules AC Input Voltage Input Range: 90-264Vac Frequency Range: 47-63Hz Phase: Single Phase Typical Input Current: 12.9A at 115Vac input, full load Power Factor Correction: 0.95 min @ 115Vac, full load Typical Leakage Current: 700uA at 240Vac https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/1600109103698-F4GIETO3Z16DPT0XA26U/FASK1200F-1U+Output+Table.jpg FSAK-1U 1200 Watt ATX Industrial Power Supply Output Table Notes: 1. Total continuous combined output(s) wattage: 1200W. 2. Peak current of 12V is 110% of max rated current up to 15mS at 115Vac nominal input. https://www.dscpower.com/404-page daily 0.75 2025-05-09 https://www.dscpower.com/dc-input-atx-blade-power-supply daily 0.75 2025-08-05 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/7a022db8-5b6d-489f-bdb8-47f48bcbb7f6/custom-dc-input-atx-blade-server-power-supply.jpg DC Input, ATX Blade Power Supply - Custom, DC Input, ATX Blade Power Supply Application: Rack server system utilizing a 12V distributed power architecture requiring a custom dc input, ATX power supply in a single “blade” configuration to provide ATX voltages to the SBC. Project Abstract: Design a hot swappable, open PCB product that will connect to a 12V distributed bus providing 100 amps of pass-through current and an output section to convert the 12V to regulated ATX voltages -5V, 3.3V, -12V and 5V standby. Incorporated standard ATX control/signal functions with a RS485 communications. Key Product Highlights:· Input: 12VdcMain Output: 12Vdc @ 100 amps, pass throughATX Outputs: 3.3V, 5V, -12V and 5V Stby ATX Combined Output Power: 250 watts Operating Temp: 0° to +50°C, Convection Cooled Incorporate edge card for RS485 communications EMC Immunity: Designed to IEC61000 Output Cabling: 24pin ATX (Optional cabling & connector options) Size: 1.3” x 3.5” x 8.5” https://www.dscpower.com/components-interconnects-link-page daily 0.75 2020-10-08 https://www.dscpower.com/products-systems-link-page daily 0.75 2020-10-08 https://www.dscpower.com/misc-business-link-page daily 0.75 2020-10-08 https://www.dscpower.com/connections-page daily 0.75 2021-01-15 https://www.dscpower.com/energy-power-link-page daily 0.75 2020-10-08 https://www.dscpower.com/4000-watt-custom-power-supply daily 0.75 2025-08-05 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/cc251d31-8a42-48e3-b335-6ecd2922477e/custom-4000-watt-power-supply-wind-turbine-control.jpg 4000W Custom Power Supply - Custom, 4000 Watt, Power Supply for Wind Turbine Control Overview Application: Industrial grade power supply to operate inside wind turbine hub to power an electronic control system that monitors and regulates gust control flaps on the blades. Project Abstract: Design a robust, 4KW, three phase power with three main objectives. One, the supply had to be 100% immune from the effects of steady and high acceleration vibrations. Two, must be able to reliably operate under harsh environmental conditions (dust, ice, rain, & high humidity) and extreme temperature variations. Three, all I/O connections had to incorporate lightening & magnetic field surge protection. Product Highlights: Input from Turbine: 400VAC, 3-Phase, 50/60Hz Custom Input section: Redundant, 3-Phase, Front End Output 1: 230Vac @ 900VA to Compressor Output 2: 24Vdc @ 4000W Output 3: 24Vdc @250W Operating Temp: -20° to +70°C Shock & Vibration: IEC 61373 EMC Immunity: IEC61000 Enclosure Rating: IP 65 Signal/Controls: Custom CAN bus Communication Size: 28.0” x 20.0” x 14.0” https://www.dscpower.com/200-watt-dual-input-industrial-power-supply daily 0.75 2025-07-29 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/8221ddce-b448-40ac-9711-124c9b7c706d/200-Watt-Dual-Input-Industrial-Power-Supply.jpg 200 Watt Dual Input Industrial Power Supply - 200 Watt, Dual Input, Industrial Grade Power Supply Application: Industrial control system requiring the power supply to operate from 12Vdc battery or 115Vac utility power and would fit their mechanical constraints Project Abstract: Utilize our existing DI200 (Dual input, 200 watt power supply) platform to re-design the PCB to mount into an enclosed chassis that would fit the customer’s mechanical constraints. The DI200 model was designed to operate in high temp environments and provide conduction cooling via a baseplate. We used our modular technology to expedite sample delivery and to minimize NRE redesign costs. Product Highlights: Dual Input: 12Vdc or 115Vac Output: 200 watts Output Voltage: 24Vdc Custom Aluminum Enclosure Baseplate Operating Temp: -40° to +85°C Specialized I/O Connectors https://www.dscpower.com/agps-350-watt-do160-power-supply daily 0.75 2026-03-25 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/8e786964-9e89-4f15-9922-7e693d4c47ba/AGPS300-1P-XX-Single-Output-DO-160-Grade-Power-Supply.jpg AGPS 350 Watt DO-160 Power Supply - AGPS300-1P-XX: DO-160 Grade, Single Phase, Power Supply Product Specification Product Description This product is a 300 watt, single output, DO-160 grade, power supply designed for electronic systems operating in avionics environments. This power supply includes an active PFC input section and an EMI filtering stage to meet power quality requirements for Boeing and Airbus aircraft operations. Product Features Designed to Meet RTCA/DO-160 Power Requirements Operating Temperature Range: -40º to +85ºC Baseplate Mounting, Conduction Cooled AC Input Voltage Input Range: 90-134Vac (115Vac nominal) Frequency Range: 360-440Hz (Optional 360-800Hz) Phase: Single Phase, 2 wire plus ground Power Factor Correction: 0.95 min @ 115Vac, full load Input Power Compliance: Designed to meet RTCA/DO-160F, Section 16 Voltage Spike Immunity: Designed to meet RTCA/DO-160F, Section 17 Output Selection Guide Single Output Voltages: 12Vdc, 24Vdc, 28Vdc, & 48Vdc (Custom output voltages are available, consult factory) DC Output Characteristics (floating) Output Power: 300 watts (maximum continuous power, may require derating for some low voltage outputs) Line Regulation: ±2.0% Typical Load Regulation: ±2.0% Typical (No load to full load; nominal input) Output Ripple/Noise: 1% Typical (pk-pk; nominal input; full load; 20MHz bandwidth) Set Point Accuracy: ±1.0% of Output Voltage (Nominal input; full load; 25°C) Transient Response: Output voltage returns to within 1% in less than 2.5mS for a 50% load change and the peak transient does not excess 5% Overshoot: Turn-on and turn-off overshoot should not exceed 5% over nominal voltage Electrical Characteristics Switching Frequency: 250KHz Fixed Efficiency: 85% Typical (Measuring at 115Vac and at full load) Turn On Delay: 250 to 500mS (To nominal output voltage) Isolation Voltage: Input to Output: 3000VAC Input to Chassis: 1500VAC (30 seconds) Output to Chassis: 500Vdc Isolation Resistance: 100Mohms (Input to output) Temperature Regulation: ±0.005%/degree C (±2% Maximum over operating temp range) Protection Over Current Limit: 115 to 130%. Auto-recovery after removal of overload condition Over-Voltage Setpoint: 108 to 125% of output voltage. Unit latched 1 minute, recycle AC input to reset Short Circuit: Auto-recovery after short circuit condition is removed Over Temperature Protection: The power supply is protected for over temperature conditions with thermal shutdown. Auto-Recovery when temperature returns to normal Environmental Operating Temperature: -40º to +85ºC (baseplate) Storage Temperature: -50º to +100ºC Operating Humidity: 10% to 95%, non-condensing Storage Humidity: 5% to 95%, non-condensing Operating Altitude: Sea-level to 40,000 ft. Shock & Vibration: Designed to meet RTCA/DO-160 Section 7, Cat B & Section 8, Category Z, Curve B RF Susceptibility (Conducted & Radiated): Designed to meet RTCA/DO-160, Section 20, Category M Emissions (Conducted & Radiated): Designed to meet RTCA/DO-160, Section 21, Category M Cooling Conduction Cooling: Baseplate not to exceed +85ºC for full rated output Mechanical Enclosure: Metal chassis, aluminum baseplate and enclosure, non-finish Outline Dimensions: 5.0" X 8.0" X 2.6" (W X L X H) – not including I/O connector Weight: 3.5 lbs. AC Input Connector (J1): D-Sub Type or EQ. DC Output Connector (J2): D-SubType or EQ. Optional Features, Controls or Alarms Consult factory Note Product specifications subject to change without notice. https://www.dscpower.com/1u-2-bay-hotswap-redundant-atx-power-supply-rack-system daily 0.75 2020-11-10 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/1604969076735-7J7HRZASN4WFMA65FOQX/1U_2-bay_Hotswap_Redundant_ATX_Power_Supply_Rack_System.jpg 1U, 2 Bay, Hot-Swap, Redundant, ATX Power Supply Rack System - FRAKxxxFH: 1U, 2 Bay, Hot-Swap, Redundant, ATX Power Supply Rack System Product Specification Product Description This product is a 1U, 2 bay, 1+1, hot-swap, ATX power supply rack system incorporating individual power modules offering up to 4 outputs plus a 5V stdby in 750W, 850W, 1000W, 1200W, and 1600W (230Vac input) power module increments. Product Features 1U, 1+1, 2 Bay, Rack Mountable ATX Power System Hot Swap Power Modules for Redundant Operation Active Current Sharing & MOSFET Module Isolation ATX Outputs: 3.3V, 5V, 12V and 5V Stdby AC Input Voltage Input Range: 90-264Vac Frequency Range: 47-63Hz Phase: Single Phase Power Factor Correction: 0.95 min @ 115Vac, full load https://www.dscpower.com/custom-military-power-supply-1000-watt-ac-to-dc daily 0.75 2025-08-05 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/c8f030cd-037e-4574-95de-aeab0e79fd95/custom-military-power-supply-1000-watt-ac-to-dc.jpg Custom Military Power Supply 1000 Watt AC to DC - Custom Military Power Supply – 1000 Watt, AC to DC Application: Custom military power supply required for UHF military radio for use with ground support equipment. Project Abstract: This customer’s application required the custom military power supply to be a self-contained, standalone, weatherproof chassis for portability and plug-n-play operation in any weather condition or location. Since this is a military program, this custom military power supply would need to be designed to meet related MIL-SPECs and MIL-STDs. Their basic power need was 1000 watts with an output of 28Vdc which is not unusual or difficult from a design standpoint. The engineering challenge is the high ambient temperature inside the chassis from external ambient increasing and the internal electronics generating their own heat. The first design objective was to design the power supply to operate in high temp environments by utilizing a high efficiency rectifier and dc output section. Additionally, the components used for this design would be military grade to tolerate high temperatures. The second objective was to design around a conduction cooled baseplate architecture. This would allow the power supply unit to be mounted to a heatsink. The final part of the design was the custom chassis which included an integrated heatsink provided by our excellent metal fabricator. Product Highlights: Designed to meet MIL-STD-461/704/810/1275 Universal Input: 90-264Vac, 47-440Hz Output: 1000 watts Output Voltage: 28Vdc Convection Cooling - Integrated Heatsink Sealed, Weatherproof Chassis https://www.dscpower.com/2000-watt-custom-aerospace-power-supply daily 0.75 2025-08-05 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/c7b6b32f-62fc-4509-946a-744f4f8f8ee2/mil-std-2000-watt-custom-miltary-aircraft-power-supply.jpg 2000 Watt Custom Aerospace Power Supply - 2000 Watt, Custom Military Aircraft Power Supply Overview Application: 2000 watt custom aerospace power supply for military aircraft. Project Abstract: This customer required a 2000 watt custom aerospace power supply to operate on a military aircraft. It would convert 115VAC, three phase, 400Hz power to a single 28Vdc output. Application also required enclosed chassis with MIL-DTL-38999 circular connectors. Being a military program, this custom aerospace power supply would be designed to meet MIL-SPECs and all relevant MIL-STDs for the following be MIL-STD-461, MIL-STD-704, MIL-STD-810, and MIL-STD-1275. Our solution was derived from our three phase military line of power supplies which was designed to be modifiable to meet the varied applications of our customers. The MGPS-3P series is a two board platform which utilizes a front end section and a dc output section. Both boards can be easily and quickly customized meet to specific customer requirements. These boards can be mounted into various enclosures and feature a solid, flat surface area for conduction cooling. This allow the power supply to be conduction cooled via the baseplate and provides the widest operation temperature range. Essentially, we used existing boards to derive the custom aerospace power supply product and mounted the boards into an existing chassis with mil-circular connectors cut-outs. Final assembly was primarily wiring I/O connections to board connections. . Product Highlights: Designed to meet MIL-STD-461/704/810/1275 Input: 115Vac, 3-Phase, 400Hz Output: 2000 watts Output Voltage: 28Vdc Sealed Weatherproof Chassis Operating Temp: -40° to +85°C Conduction Cooling – Baseplate https://www.dscpower.com/custom-1500-watt-military-power-supply daily 0.75 2025-08-05 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/66f82cb7-4653-42a6-bbfd-aac097cd9036/mil-std-1500-watt-custom-miltary-power-supply.jpg Custom 1500 Watt Military Power Supply - 1500 Watt Custom Military Power Supply Overview Application: Custom 1500 watt military power supply for helicopter application. Project Abstract: This customer’s application required the custom military power supply to be a self-contained, chassis mounting unit for attachment on to the frame of the helicopter. As wit all military programs, this custom military power supply would need to be designed to meet related MIL-SPECs and MIL-STD-461, 702, 810, and 1275. The system being powered by this supply had a maximum draw of 1500 watts and required output voltages of 28Vdc and 5Vdc. The engineering challenge is designing the supply to operate in high ambient temperature environments and be able to withstand extreme shock and vibration conditions. The first design objective was to construct the 1500 input and output sections to meet the high temp demands by utilizing a high efficiency rectifier and dc output section. All of the components used for this design would be high-temp, military grade to withstand high temperature operation. Part of this design effort included integrating a baseplate architecture to provide the conduction cooling, allowing the custom 1500 watt military power supply to be cooled to the mounting structure. Product Highlights: Designed to meet MIL-STD-461/704/810/1275 Universal Input: 90 to 264Vac, 47 to440Hz Total Output: 1500 watts V1 Output: 5Vdc @ 500W V2 Output: 28Vdc @ 1000W Operating Temp: -40° to +85°C Baseplate Mounted Conduction Cooled https://www.dscpower.com/custom-300-watt-ip67-industrial-power-supply daily 0.75 2025-08-05 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/daf24440-3eed-4962-b44c-9fdb8de3df9e/custom-IP67-industrial-power-supply-300-watts.jpg Custom 300 Watt IP67 industrial Power Supply - Custom IP67 Industrial Power Supply - 300 Watts Application: Custom IP67 industrial power supply designed for operating communications equipment in remote areas. Project Abstract: This customer required This power supply was custom designed for a customer requiring the power supply to operate reliably in remote locations under adverse weather conditions and high temperature environments. The enclosure for this power supply needed to be a minimum IP65 rated to prevent any moisture from penetrating to any of the inside electronics. The particular power requirement for this application was 300 watts with a single 24Vdc output. DSC Power Solutions utilized a pre-existing platform and re-design the PCB to mount into a specific IP67 chassis. The original circuit was designed to operate in high temp environments which made use of a conduction cooling through a single baseplate. This architecture allows cooling through an external heatsink to be attached and to only one side of the enclosure. As with most of our designs, we utilize high efficiency, ac-dc rectifier architecture to produce the 300 watts of continuous power output. Incorporated into the design is an EMI filter section and control electronics board to provide the functional controls to improve input and output electrical characteristics. This custom IP67 industrial power supply is a flexible design and can be adapted to different uses. We can provide output and mechanical variations to meet different customer applications. Some simple mechanical changes are different I/O connectors or a different enclosure style. The output voltage can easily be changed and we can also add remote on/off, dc good, power fail and other common signals. Product Highlights: Designed to meet IP67 Ingress Rating Universal Input: 90-264Vac, 47-440Hz Output: 300 watts Output Voltage: 24Vdc Conduction Cooling - Baseplate Sealed, Weatherproof Chassis https://www.dscpower.com/500-ip67-rated-power-supply daily 0.75 2025-07-29 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/99b96388-4391-4d8c-9dc1-df9aac699922/500-Watt-IP67-Rated-Industrial-Power-Supply.jpg 500 IP67 Rated Power Supply - 500 Watt, IP67 Rated, Industrial Power Supply Overview Application: Ground support equipment for Uplink satellite communications system requiring a weatherproof, industrial grade power supply to operate outside in all types of weather and extreme temperature variations. Project Abstract: Utilize an existing platform to design robust, 500 watt, single phase, power supply enclosed in a IP67 rated chassis to operate in all type of weather conditions and could reliable operate in high temp environments. This design utilized modular technology to provide a baseplate, conduction cooled product solution which will incorporated a heatsink to provide the necessary cooling during high temp operation. Included in the heatsink were special flanges for pole mounting the power supply. Product Highlights: Universal Input: 90-2640VAC, 50/60Hz Output: 500 watts Output Voltage: 24Vdc IP67 Rated Enclosure Custom Heatsink for Convection Cooling Ambient Operating Temp: -40° to +60°C Specialized I/O Connectors https://www.dscpower.com/270-vdc-input-500-watt-military-dc-dc-converter daily 0.75 2025-08-05 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/45c4be13-8d96-4cee-9ec0-4b4870becc5b/custom-270vdc-input-500-watt-dc-dc-converter.jpg 270VDC Input, 500 Watt, Military DC to DC Converter - 270VDC Input, 500 Watt, Military DC to DC Converter Application: Custom, 270Vdc input, dc to dc converter requiring MIL-SPEC compliance to power a flight instrumentation system for a military rotary aircraft. Project Abstract: This application required a unique chassis design to fit in a small, 1.5” x 1.5” rectangular space and provide a full 500 watts of 28Vdc. To meet this project requirements, the design would require a custom chassis and unique PCB layout to achieve the specific electrical performance requirements and mechanical constraints. The direction of the design would incorporate the EMI filter stage, the surge protection components and the high efficiency, dc to dc, converter section on a discrete PCB to fit into the chassis. This design would meet MIL-STD-461, MIL-STD-704 and MIL-STD-1275. Product Highlights: DC Input: 250-290Vdc (270Vdc Nominal) Output: 500 watts Output Voltage: 28Vdc Baseplate Operating Temp: -40° to +85°C Custom Chassis with D-Sub Connectors Designed to meet MIL-STD-461/704/810/1275 https://www.dscpower.com/60-watt-do160-power-supply daily 0.75 2025-08-05 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/96a69bfa-1010-4043-b3ae-9ca3e78b8379/custom-60-watt-DO-160-power-supply-ac-to-dc-for-cabin-lighting.jpg 60 Watt DO-160 Power Supply - Custom, 60 Watt, DO-160, AC to DC Power Supply for Cabin Lighting Application: Multi-color LED mood lighting controlled by the cabin management system to provide power and control signals for up to two separate LED lighting units. Project Abstract: Design a custom 60 watt power supply to meet Airbus AD0100 general equipment design requirements and Boeing’s DO-160 environmental conditions for airborne equipment. Power supply would operate form a wide frequency range, provide two dc outputs and would integrate a separate PCB for the communications module for the cabin management I/O for the CAN bus and RS-485 communications. Key Product Highlights:· Input: 115Vac, Single Phase Wide Frequency range: 360-800Hz Main Output: 8Vdc for LED lamps 1 and 2 Aux Outputs: 3.3V for communications module Combined Output Power: 60 watts Operating Temp: -15° to +55°C, conduction cooled Short Time Survival Temp: -40° to +70°C, conduction cooled Communications Interface: RS485 & CAN Bus Designed to meet applicable AD0100 & DO-160 requirements https://www.dscpower.com/2u-rack-systems daily 0.75 2025-07-24 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/63170214-d734-4bad-897b-48613fb33372/2U-2-Bay-Hot-Swap-Redundant-ATX-Power-Supply-Rack-System.jpg Hot Swap Systems - 2U, 2 Bay, Hot-Swap, ATX Outputs, N+1 System Designed for Intel ATX12V, VME and CompactPCI Power Module Ratings: 360 to 750 Watts Up to 6 outputs (3.3V, 5V, 12V, & 24V) with 5VStby Industry Standard PS/2 Form Factor https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/9fcee601-f0c1-4815-8a05-01cac22d9247/2U-2-Bay-Hot-Swap-Redundant-N%2B1-Power-Supply-Rack-System.jpg Hot Swap Systems - 2U, 2 Bay, Hot-Swap, Single Output N+1 System Power Module Ratings: 750 to 1600 Watts Active Current Share & Module Isolation Single Output: 12V, 24V, 28V, 48V or 56V plus 5V Stby Optional I2C/PSMI Power Module Information https://www.dscpower.com/2u-2-bay-single-output-hotswap-redundant-power-supply-rack-system daily 0.75 2025-07-24 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/5d28c1ee-bf62-4c73-a35f-c34560d0963b/FRAKxxxFV-2U-2-Bay-Hot-Swap-Redundant-N%2B1-Power-Supply-Rack-System.jpg 2U, 2 Bay, Single Output, Hot-Swap, Redundant, Power Supply Rack System - FRAKxxxFV: 2U, 2 Bay, Hot-Swap, Redundant, Single Output, Power Supply Rack System Product Specification Product Description This product is a 2U, 2 bay, 1+1, hot-swap, single output, power supply rack system incorporating individual power modules offering single output 12V, 24V, 28V, 48V or 56V plus a 5V stdby in 750W, 850W, 1000W, 1200W, and 1600W (230Vac input) power module increments. Product Features 2U, 1+1, 2 Bay, Rack Mountable Power System Hot Swap Power Modules for Redundant Operation Active Current Sharing & MOSFET Module Isolation Single Output: 12V, 24V, 28V, 48V or 56V and 5V Stdby AC Input Voltage Input Range: 90-264Vac Frequency Range: 47-63Hz Phase: Single Phase Power Factor Correction: 0.95 min @ 115Vac, full load https://www.dscpower.com/1u-hot-swap-redundant-atx-power-supply-rack-system daily 0.75 2025-07-29 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/81cc83a7-6130-4867-a626-1a886d9f48e6/Hot-Swap-N%2B1-Redundant-ATX-Power-Supply-Rack-System.jpg 1U Hot Swap Redundant ATX Power Supply Rack System - Hot Swap, Redundant, ATX Power Supply Rack System Application: Hi-Rel, industrial server system requiring a 1+1 hot-swap, redundant power supply unit to provide continuous ATX output voltages to their backplane. Project Abstract: The customer required a power supply rack system to provide different levels of total output power depending on the configuration of the computer. Some lower-end systems might only draw 700 watts and do not need the power of some higher-end systems that could draw up to 1200 watts. The customer wanted to be able to load different power ratings to match the system’s power consumption. Additionally, the power supply system had to be hot-swappable and the complete system be contained in a 1U rack mountable chassis. Product Highlights: Input Voltage: 90-2640VAC, 50/60Hz Output Power Range: 750W, 850W, 1000W, 1200W & 1600W (230/240Vac) 1U Rack Mountable Chassis 2 Slot, Configurable Power Module Ratings Optional I/O Connectors and Cabling https://www.dscpower.com/1u-hot-swap-redundant-single-output-power-supply-rack-system daily 0.75 2021-04-08 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/1617913042326-43QVH0HOP1SXDSF5H6NX/1U_2-bay_Hotswap_Redundant_Single_Output_Power_Supply_Rack_System.jpg 1U Hot Swap Redundant Single Output Power Supply Rack System - Hot Swap Single Output Redundant Power Supply Rack System Application: Hi-Rel, industrial server system requiring a 1+1 hot-swap, redundant power supply unit to provide continuous single output voltage to their backplane. Project Abstract: The customer required a power supply rack system to provide different levels of total output power depending on the configuration of the computer. Some lower-end systems might only draw 700 watts and do not need the power of some higher-end systems that could draw up to 1200 watts. The customer wanted to be able to load different power ratings to match the system’s power consumption. Additionally, the power supply system had to be hot-swappable and the complete system be contained in a 1U rack mountable chassis. Product Highlights: Input Voltage: 90-2640VAC, 50/60Hz Output Power Range: 750W, 850W, 1000W, 1200W & 1600W (230/240Vac) 1U Rack Mountable Chassis 2 Slot, Configurable Power Module Ratings Optional I/O Connectors and Cabling https://www.dscpower.com/1u-2-bay-single-output-hotswap-redundant-power-supply-rack-system daily 0.75 2021-04-08 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/1617913211454-3FI6Z2SV58N41CI2VOIE/1U_2-bay_Hotswap_Redundant_Single_Output_Power_Supply_Rack_System.jpg 1U, 2 Bay, Single Output, Hot-Swap, Redundant, Power Supply Rack System - FRAKxxxFH: 1U, 2 Bay, Hot-Swap, Redundant, Single Output, Power Supply Rack System Product Specification Product Description This product is a 1U, 2 bay, 1+1, hot-swap, single output, power supply rack system incorporating individual power modules offering single output 12V, 24V, 28V, 48V or 56V plus a 5V stdby in 750W, 850W, 1000W, 1200W, and 1600W (230Vac input) power module increments. Product Features 1U, 1+1, 2 Bay, Rack Mountable Power System Hot Swap Power Modules for Redundant Operation Active Current Sharing & MOSFET Module Isolation Single Output: 12V, 24V, 28V, 48V or 56V and 5V Stdby AC Input Voltage Input Range: 90-264Vac Frequency Range: 47-63Hz Phase: Single Phase Power Factor Correction: 0.95 min @ 115Vac, full load https://www.dscpower.com/2u-2-bay-hotswap-redundant-atx-power-supply-rack-system daily 0.75 2025-07-24 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/18faad30-4270-45b6-904b-e0b52678c123/FRAKxxxMV-2U-2-Bay-Hot-Swap-Redundant-ATX-Power-Supply-Rack-System.jpg 2U, 2 Bay, Hot-Swap, Redundant, ATX Power Supply Rack System - FRAKxxxMV: 2U, 2 Bay, Hot-Swap, Redundant, ATX Power Supply Rack System Product Specification Product Description This product is a 2U, 2 bay, 1+1, hot-swap, redundant, ATX power supply rack system incorporating individual power modules offering up to 6 outputs plus a 5V stdby in 360W, 420W, 480W, 540W, 600W, 660W and 750W power module increments. There is even a 24Vdc output to meet CompactPCI and VME platform requirements Product Features 2U, 1+1, 2 Bay, Rack Mountable ATX Power System Hot Swap Power Modules for Redundant Operation Up to 6 Outputs with 5V Standby Output Options: 3.3V, 5V, 12V, & 24V AC Input Voltage Input Range: 90-264Vac Frequency Range: 47-63Hz Phase: Single Phase Typical Input Current: 7.1A at 115Vac input, full load Power Factor Correction: 0.95 min @ 115Vac, full load https://www.dscpower.com/300-watt-do160-wide-frequency-range-power-supply daily 0.75 2025-07-29 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/95ce363c-0ea7-41f0-a04b-516bcc8f1898/300-Watt-DO-160-Wide-Frequency-Range-Power-Supply.jpg 300 Watt DO-160 Wide Frequency Range Power Supply - 300 Watt, DO-160, Wide Frequency Range Power Supply Application: Internal cabin equipment requiring a power supply to operate from a 115VAC power source with a 360-800Hz wide frequency range for Boeing and Airbus commercial aircraft applications. Project Abstract: The goal was to use existing “hardware” to minimize the NRE cost, incorporate proven designs and accelerate the delivery cycle for samples. We used a previously designed, wide range frequency frontend as the primary input section and matched it with one of our high efficiency, dc to dc converter modules. These sections were positioned on a PCB that included additional EMI filtering, hold up capacitors and control circuitry. This model was designed to operate in high temp environments and provides conduction cooling through the baseplate. Product Highlights: Wide Frequency Range: 360-800Hz Input voltage: 115Vac, Single Phase Output: 300 watts Output Voltage: 24Vdc Custom Aluminum Enclosure Baseplate Operating Temp: -40° to +85°C Specialized I/O Connectors https://www.dscpower.com/4000-watt-military-grade-rack-mount-power-supply daily 0.75 2025-07-29 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/64d17a9c-c78e-4183-92dd-a7d0655fa94e/4000-Watt-Custom-Military-Grade-Rack-Mount-Power-System.jpg 4000 Watt Military Grade Rack Mount Power Supply - 4000 Watt Custom Rack Mount Power Supply Overview Application: Military RF equipment requiring a ruggedized rack mount power supply. Project Abstract: The initial inquiry was for a two, 2000W Mil-Grade power supply that would be used in a platform to power electronics for a RF system. The customer wanted a turn-key system that would operate in a higher temp environment and would meet MIL-STDs applicable to power systems. It was decided that a 19” rack mount chassis supplying 4KW or power would be the solution to mount and power up need. We used existing 2KW Mil-Grade power supplies mounted on a heatsink inside a 19” chassis with fans would be the least cost approach to a complete system. The customer could mount it in their existing rack and cable to some D38999 I/O connectors for easy hookup. Key Product Highlights: • Designed to Meet MIL-STD-461/702/810 • Input: 90-240Vac, 50/60Hz, Single Phase • 19” Rack Mount Chassis • Dual, Isolated, 28Vdc Outputs • Ambient Operating Temp Range: 0° to +55°C • Mil-Circular D3899 I/O Connectors https://www.dscpower.com/mgps-1p-1200-watt-military-power-supply daily 0.75 2025-07-14 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/310eec3a-5c83-40fe-a2cb-b4ad59edd694/MGPS1200-1P-XX-Single-Phase-Series-Military-Grade-Power-Supply.jpg MGPS-1P 1200 Watt Military Power Supply - MGPS1200-1P-XX: 1200 Watt, Single Output, Military Grade Power Supply - Product Specification Product Description This product is a 1200 watt, single output, military grade power supply designed for electronic systems operating in harsh environments under adverse temperature conditions. It is intended for a single phase, AC power source and designed to meet applicable military standards for airborne, ground and shipboard applications. Product Features Meets MIL-STD-461/704/810/1399 Wide Frequency Range: 47 to 440Hz Operating Temperature Range: -40º to +85ºC Conduction Cooled, Baseplate Mounting AC Input Voltage Input Range: 90-264Vac (115/208/230VAC nominal input) Frequency Range: 47-440Hz (50/60/400Hz nominal) Phase: Single Phase, 2 wire plus ground Power Factor Correction: 0.95 min @ 115Vac, full load. Designed to meet MIL-STD-1399, Section 300A (60Hz) Input Transient Protection: Designed to meet MIL-STD-704A/D (80Vdc for 100mSec) Input Surge Protection: Designed to meet MIL-STD-1275A/D (100Vdc for 50mSec) Output Selection Guide Single Output Voltages: 12Vdc, 24Vdc, 28Vdc, & 48Vdc (Custom output voltages are available, consult factory) DC Output Characteristics (floating) Output Power: 1200 watts (maximum continuous power, may require derating for some low voltage outputs) Line Regulation: ±2.0% Typical Load Regulation: ±2.0% Typical (No load to full load; nominal input) Output Ripple/Noise: 1% Typical (pk-pk; nominal input; full load; 20MHz bandwidth) Set Point Accuracy: ±1.0% of Output Voltage (Nominal input; full load; 25°C) Transient Response: Output voltage returns to within 1% in less than 2.5mS for a 50% load change and the peak transient does not excess 5% Overshoot: Turn-on and turn-off overshoot should not exceed 5% over nominal voltage Electrical Characteristics Switching Frequency: 250KHz Fixed Efficiency: 88% Typical (Measuring at 115Vac and at full load) Turn On Delay: 250 to 500mS (To nominal output voltage) Isolation Voltage: Input to Output: 3000VAC Input to Chassis: 1500VAC (30 seconds) Output to Chassis: 500Vdc Isolation Resistance: 100Mohms (Input to output) Temperature Regulation: +/- 0.005%/degree C (+/- 2% Maximum over operating temp range) Protection Over Current Limit: 115 to 130%. Auto-recovery after removal of overload condition Over-Voltage Setpoint: 108 to 125% of output voltage. Unit latched 1 minute, recycle AC input to reset Short Circuit: Auto-recovery after short circuit condition is removed Over Temperature Protection: The power supply is protected for over temperature conditions with thermal shutdown. Auto-Recovery when temperature returns to normal Environmental Operating Temperature: -40º to +85ºC (baseplate) Storage Temperature: -50º to +100ºC Operating Humidity: 10% to 90%, non-condensing Storage Humidity: 5% to 95% RH, Non-condensing Operating Altitude: Sea-level to 15,000 ft. max. Shock & Vibration: Designed to meet MIL-STD-810H EMC Radiated & Conducted EMI: Designed to meet MIL-STD-461F/G Cooling Conduction Cooling: Baseplate not to exceed +85ºC for full rated output Mechanical Enclosure: Metal chassis, aluminum baseplate and enclosure, gold finish Outline Dimensions: 2.6” x 7.5" X 11.0" (H X W X L) – excluding I/O connectors Weight: 7.5 lbs. AC Input Connector: D38999/20WC04PN DC Output Connector: D38999/20WE6SN Optional Features, Controls or Alarms Consult factory Note Product specifications subject to change without notice https://www.dscpower.com/mgps-3p-1200-watt-aerospace-power-supply daily 0.75 2025-07-14 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/cb187aac-c749-4b37-a688-9e6f80086dda/MGPS1200-3P-XX-Single-Output-Military-Grade-Power-Supply.jpg MGPS-3P 1200 Watt Aerospace Power Supply - MGPS1200-3P-XX: Three Phase Series, Aerospace Power Supply Product Specification Product Description This product is a 1200 watt, single output, military grade power supply designed for electronic systems operating in harsh environments under severe temperature conditions. It is intended for aerospace operations that utilize a 3 phase, 400Hz, AC power sources and designed to meet applicable military standards for airborne applications. Product Features Meets MIL-STD-461/704/810 Wide Frequency Range: 360 to 440Hz Operating Temperature Range: -40º to +85ºC Conduction Cooled, Baseplate Mounting AC Input Voltage Input Range: 95-138VAC (115VAC nominal) Frequency: 400Hz (360-440Hz) Phase: Three Phase, 3 wire plus ground Power Factor Correction: 0.95 min @ 115Vac, full load Input Transient Protection: Designed to meet MIL-STD-704A/D (80Vdc for 100mSec) Input Surge Protection: Designed to meet MIL-STD-1275A/D (100Vdc for 50mSec) Output Selection Guide Single Output Voltages: 12Vdc, 24Vdc, 28Vdc, & 48Vdc (Custom output voltages are available, consult factory) DC Output Characteristics (floating) Output Power: 1200 watts (maximum continuous power, may require derating for some low voltage outputs) Line Regulation: ±2.0% Typical Load Regulation: ±2.0% Typical (No load to full load; nominal input) Output Ripple/Noise: 1% Typical (pk-pk; nominal input; full load; 20MHz bandwidth) Set Point Accuracy: ±1.0% of Output Voltage (Nominal input; full load; 25°C) Transient Response: Output voltage returns to within 1% in less than 2.5mS for a 50% load change and the peak transient does not excess 5% Overshoot: Turn-on and turn-off overshoot should not exceed 5% over nominal voltage Electrical Characteristics Switching Frequency: 250KHz Fixed Efficiency: 88% Typical (Measuring at 115Vac and at full load) Turn On Delay: 250 to 500mS (To nominal output voltage) Isolation Voltage: Input to Output: 3000VAC Input to Chassis: 1500VAC (30 seconds) Output to Chassis: 500Vdc Isolation Resistance: 100Mohms (Input to output) Temperature Regulation: +/- 0.005%/degree C (+/- 2% Maximum over operating temp range) Protection Over Current Limit: 115 to 130%. Auto-recovery after removal of overload condition Over-Voltage Setpoint: 108 to 125% of output voltage. Unit latched 1 minute, recycle AC input to reset Short Circuit: Auto-recovery after short circuit condition is removed Over Temperature Protection: The power supply is protected for over temperature conditions with thermal shutdown. Auto-Recovery when temperature returns to normal Environmental Operating Temperature: -40º to +85ºC (baseplate) Storage Temperature: -50º to +100ºC Operating Humidity: 10% to 95%, non-condensing Storage Humidity: 5% to 95%, non-condensing Operating Altitude: Sea-level to 40,000 ft. Shock & Vibration: Designed to meet MIL-STD-810G EMC Radiated & Conducted EMI: Designed to meet MIL-STD-461F Cooling Conduction Cooling: Baseplate not to exceed +85ºC for full rated output Mechanical Enclosure: Metal chassis, aluminum baseplate and enclosure, black-finish Outline Dimensions: 2.6" X 7.5" X 11.0" (H X W X L) – not including I/O connectors Weight: 7.5 lbs. AC Input Connector (J1): ITT Cannon PN: DBMMD5W5P DC Output Connector (J2): ITT Cannon PN: DBMMD9H4SJ Optional Features, Controls or Alarms Consult factory Note Product specifications subject to change without notice https://www.dscpower.com/custom-navy-mil-std-901-2000-watt-power-supply daily 0.75 2025-08-05 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/909e6ef3-efc8-4b5f-bb5d-e46dda01072e/mil-std-901-2000-watt-shipboard-power-supply.jpg Custom Navy Mil-STD-901 2000 Watt Power Supply - Custom MIL-STD 901, 2000 Watt Power Supply Overview Application: Custom Navy power supply to meet MIL-STD-901. Project Abstract: This customer is working on a IRAD program for the next generation satcom terminal for the US Navy. The application called for a dual output, 2000 watt, ac to dc watt power that would meet MIL-STD-901, Grade A, Class I, Type A shock testing and MIL-STDs 461, 810 & 1399. This customer’s application required the custom military power supply to be a self-contained, standalone. Since this is a Navy military program, this custom military power supply would need to be designed to meet related MIL-SPECs and MIL-STDs. Their basic power needs: 2000 watts, dual output, 24Vdc & 48Vdc which is not unusual or difficult from a design standpoint. The engineering challenge is the high shock requirement which requires additional structural enhancements to the internal components. The first design objective was to design the power supply to withstand MIL-STD-901 extreme shock requiring securing of high mass components. Special strapping methods and supports were designed to eliminate component movement. Additionally, this design would be high-temp, military grade components to tolerate high temps. The second objective was to design a conduction cooled baseplate architecture. This would allow the power supply unit to be mounted to a heatsink or cold-plate mount. Product Highlights: Designed to meet MIL-STD-901 and MIL-STD 461/810/1399 Input: 230Vac, Single Phase, 50Hz Output: 2000 watts Output Voltages: Dual 24Vdc & 48Vdc Baseplate Operating Temp: -40° to +85°C Conduction Cooling – Baseplate https://www.dscpower.com/custom-2400-watt-navy-shipboard-power-supply daily 0.75 2025-08-05 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/381b4149-8acb-4d21-83f9-11116f565dcd/mil-std-901-2400-watt-shipboard-power-supply.jpg Custom 2400 Watt Navy Shipboard Power Supply - MIL-STD-901, 2400 Watt, Shipboard Power Supply Overview Application: Custom Navy power supply for Surveillance System. Project Abstract: This customer is working on the next generation surveillance system for the US Navy. The application called for a dual output, 2400 watt, ac to dc watt power that would meet MIL-STDs 461, 810 & 1399. This customer’s application required the custom military power supply to be a self-contained, standalone. Since this is a Navy military program, this custom military power supply would need to be designed to meet related MIL-SPECs and MIL-STDs. Their basic power needs: 2400 watts, single output, 48Vdc which is not unusual or difficult from a design standpoint. The design objective was to design the 2400W to operate in a high-temp environment using conduction cooling. This power supply also had some specialized I2C communications integrated into the design requested by the customer. Product Highlights: Designed to meet MIL-STD 461/810/1399 I2C Communications Input: 90-264Vac, Single Phase, 47-63Hz Output: 2400 watts Output Voltage: 48Vdc Baseplate Operating Temp: -40° to +85°C Conduction Cooling – Baseplate https://www.dscpower.com/2500-watt-military-grade-rack-mount-power-supply daily 0.75 2025-07-29 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/da1c7a6b-ba9a-49dd-b9ac-f5ab3c7513c3/2500-Watt-Custom-Military-Grade-Rack-Mount-Power-System.jpg 2500 Watt Military Grade Rack Mount Power Supply - 2500 Watt Custom Rack Mount Power Supply Overview Application: Military RF equipment requiring a ruggedized rack mount power supply. Project Abstract: The initial inquiry was for a two, 2000W Mil-Grade power supply that would be used in a platform to power electronics for a RF system. The customer wanted a turn-key system that would operate in a higher temp environment and would meet MIL-STDs applicable to power systems. It was decided that a 19” rack mount chassis supplying 4KW or power would be the solution to mount and power up need. We used existing 2KW Mil-Grade power supplies mounted on a heatsink inside a 19” chassis with fans would be the least cost approach to a complete system. The customer could mount it in their existing rack and cable to some D38999 I/O connectors for easy hookup. Key Product Highlights: • Designed to Meet MIL-STD-461/702/810 • Input: 90-240Vac, 50/60Hz, Single Phase • 19” Rack Mount Chassis • Dual, Isolated, 28Vdc Outputs • Ambient Operating Temp Range: 0° to +55°C • Mil-Circular D3899 I/O Connectors https://www.dscpower.com/agps-1200-watt-do160-power-supply daily 0.75 2026-03-25 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/4dbb3e67-ab83-47b7-8f5c-8f0abbb0cc56/AGPS1200-1P-XX-Single-Output-DO-160-Grade-Power-Supply.jpg AGPS 1200 Watt DO-160 Power Supply - AGPS1200-1P-XX: Single Phase, DO-160, Aviation Grade, Power Supply Product Specification Product Description This product is a 1200 watt, single output, DO-160, aviation grade, power supply designed for electronics systems operating in avionics environments. This power supply includes an active PFC input section and an EMI filtering stage to meet power quality requirements for Boeing and Airbus aircraft operations. Product Features Designed to Meet RTCA/DO-160 Power Requirements Operating Temperature Range: -40º to +85ºC Conduction Cooled, Baseplate Mounting AC Input Voltage Input Range: 90-134Vac (115Vac nominal) Frequency Range: 360-440Hz (Optional 360-800Hz) Phase: Single Phase, 2 wire plus ground Power Factor Correction: 0.95 min @ 115Vac, full load Input Power Compliance: Designed to meet RTCA/DO-160F, Section 16 Voltage Spike Immunity: Designed to meet RTCA/DO-160F, Section 17 Output Selection Guide Single Output Voltages: 12Vdc, 24Vdc, 28Vdc, & 48Vdc (Custom output voltages are available, consult factory) DC Output Characteristics (floating) Output Power: 1200 watts (maximum continuous power, may require derating for some low voltage outputs) Line Regulation: ±2.0% Typical Load Regulation: ±2.0% Typical (No load to full load; nominal input) Output Ripple/Noise: 1% Typical (pk-pk; nominal input; full load; 20MHz bandwidth) Set Point Accuracy: ±1.0% of Output Voltage (Nominal input; full load; 25°C) Transient Response: Output voltage returns to within 1% in less than 2.5mS for a 50% load change and the peak transient does not excess 5% Overshoot: Turn-on and turn-off overshoot should not exceed 5% over nominal voltage Electrical Characteristics Switching Frequency: 250KHz Fixed Efficiency: 85% Typical (Measuring at 115Vac and at full load) Turn On Delay: 250 to 500mS (To nominal output voltage) Isolation Voltage: Input to Output: 3000VAC Input to Chassis: 1500VAC (30 seconds) Output to Chassis: 500Vdc Isolation Resistance: 100Mohms (Input to output) Temperature Regulation: ±0.005%/degree C (±2% Maximum over operating temp range) Protection Over Current Limit: 115 to 130%. Auto-recovery after removal of overload condition Over-Voltage Setpoint: 108 to 125% of output voltage. Unit latched 1 minute, recycle AC input to reset Short Circuit: Auto-recovery after short circuit condition is removed Over Temperature Protection: The power supply is protected for over temperature conditions with thermal shutdown. Auto-Recovery when temperature returns to normal Environmental Operating Temperature: -40º to +85ºC (baseplate) Storage Temperature: -50º to +100ºC Operating Humidity: 10% to 95%, non-condensing Storage Humidity: 5% to 95%, non-condensing Operating Altitude: Sea-level to 40,000 ft. Shock & Vibration: Designed to meet RTCA/DO-160 Section 7, Cat B & Section 8, Category Z, Curve B RF Susceptibility (Conducted & Radiated): Designed to meet RTCA/DO-160, Section 20, Category M Emissions (Conducted & Radiated): Designed to meet RTCA/DO-160, Section 21, Category M Cooling Conduction Cooling: Baseplate not to exceed +85ºC for full rated output Mechanical Enclosure: Metal chassis, aluminum baseplate and enclosure, gold finish Outline Dimensions: 7.5" X 11.0" X 2.6" (W X L X H) – excluding I/O connector Weight: 7.5 lbs. AC Input Connector (J1): ITT Cannon PN: DBMM5W5P DC Output Connector (J2): ITT Cannon PN: DBMMD9H4SJ Optional Features, Controls or Alarms Consult factory Note Product specifications subject to change without notice. https://www.dscpower.com/mgdc-300-watt-military-dc-to-dc-converter daily 0.75 2026-03-16 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/3a003933-c704-494f-a65e-6cce82f6cc8c/300-watt-military-grade-DC-to-DC-Converter.jpg MGDC 300 Watt Military DC to DC Converter - MGDC300-XX-XX: 300 Watt, Military Grade, DC to DC Converter Product Specification Product Description This product is a 300 watt, single output, military grade power supply designed for electronic systems operating in demanding environments with adverse temperature conditions. This dc to dc converter is designed to meet applicable military standards for airborne, ground, vehicle, and shipboard applications. Product Features Wide Input Range: 24Vdc or 48Vdc (Nominal Input) Operating Temperature Range: -40º to +85ºC Baseplate Mounting, Conduction Cooled DC Input DC Input Range: 9 to 36Vdc (12/24/28Vdc nominal) 36 to 72Vdc (48Vdc nominal) Output Selection Guide Single Output Voltages: 12Vdc, 24Vdc, 28Vdc, & 48Vdc (Custom output voltages are available, consult factory) DC Output Characteristics (floating) Output Power: 300 watts (maximum continuous power, may require derating for some low voltage outputs) Line Regulation: ±1.0% Typical Load Regulation: ±2.0% Typical (No load to full load; nominal input) Output Ripple/Noise: 1% Typical (pk-pk; nominal input; full load; 20MHz bandwidth) Set Point Accuracy: ±1.0% of Output Voltage (Nominal input; full load; 25°C) Transient Response: Output voltage returns to within 1% in less than 2.5mS for a 50% load change and the peak transient does not excess 5% Overshoot: Turn-on and turn-off overshoot should not exceed 5% over nominal voltage Electrical Characteristics Switching Frequency: 250KHz Fixed Efficiency: 90% Typical. Measured at nominal Vdc input at full load Turn On Delay: 50 to 200mS (To nominal output voltage) Isolation Voltage: Input to Output: 3000Vdc (60 seconds) Input to Chassis: >1500Vdc (60 seconds) Output to Chassis: >1500Vdc (60 seconds) Isolation Resistance: 100Mohms (Input to output) Temperature Regulation: +/- 0.005%/degree C (+/- 2% Maximum over operating temp range) Protection Over Current Limit: 115 to 130%. Auto-recovery after removal of overload condition Over-Voltage Setpoint: 108 to 125% of output voltage. Unit latched 1 minute, recycle AC input to reset Short Circuit: Auto-recovery after short circuit condition is removed Over Temperature Protection: The power supply is protected for over temperature conditions with thermal shutdown. Auto-Recovery when temperature returns to normal Environmental Ambient Operating Temperature: -40º to +85ºC (75ºC maximum baseplate) Storage Temperature: -50º to +100ºC Operating Humidity: 5% to 90%, Non-condensing Storage Humidity: 5% to 95%, Non-condensing Operating Altitude: Sea-level to 15,000 ft. Shock & Vibration: Designed to meet MIL-STD-810F EMC Radiated & Conducted EMI: Designed to meet ML-STD-461F/G Cooling Conduction Cooling: Baseplate not to exceed +75ºC for full rated output Mechanical Enclosure: Metal chassis, aluminum baseplate and enclosure, non-finish Outline Dimensions: 4.25" X 8.75" X 2.2" (W X L X H) – not including I/O connector Weight: 4.5 lbs. DC Input Connector (J1): D38999 or EQ. DC Output Connector (J2): D38999 or EQ. Optional Features, Controls or Alarms Consult factory Note Product specifications subject to change without notice https://www.dscpower.com/mgdc-150-watt-military-dc-to-dc-converter daily 0.75 2026-03-16 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/d2aa4a66-0129-47ed-a1e4-706be7044508/150-watt-military-grade-DC-to-DC-Converter.jpg MGDC 150 Watt Military DC to DC Converter - MGDC150-XX-XX: 150 Watt, Military Grade, DC to DC Converter Product Specification Product Description This product is a 150 watt, single output, military grade power supply designed for electronic systems operating in demanding environments with adverse temperature conditions. This dc to dc converter is designed to meet applicable military standards for airborne, ground, vehicle, and shipboard applications. Product Features Wide Range Input: 24Vdc or 48Vdc (Nominal Input) Operating Temperature Range: -40º to +85ºC Baseplate Mounting, Conduction Cooled DC Input DC Input Range: 9 to 36Vdc (12/24/28Vdc nominal) 36 to 72Vdc (48Vdc nominal) Output Selection Guide Single Output Voltages: 12Vdc, 24Vdc, 28Vdc, & 48Vdc (Custom output voltages are available, consult factory) DC Output Characteristics (floating) Output Power: 150 watts (maximum continuous power, may require derating for some low voltage outputs) Line Regulation: ±1.0% Typical Load Regulation: ±2.0% Typical (No load to full load; nominal input) Output Ripple/Noise: 1% Typical (pk-pk; nominal input; full load; 20MHz bandwidth) Set Point Accuracy: ±1.0% of Output Voltage (Nominal input; full load; 25°C) Transient Response: Output voltage returns to within 1% in less than 2.5mS for a 50% load change and the peak transient does not excess 5% Overshoot: Turn-on and turn-off overshoot should not exceed 5% over nominal voltage Electrical Characteristics Switching Frequency: 250KHz Fixed Efficiency: 90% Typical. Measured at nominal Vdc input/full load Turn On Delay: 50 to 200mS (To nominal output voltage) Isolation Voltage: Input to Output: 3000Vdc (60 seconds) Input to Chassis: >1500Vdc (60 seconds) Output to Chassis: >1500Vdc (60 seconds) Isolation Resistance: 100Mohms (Input to output) Temperature Regulation: +/- 0.005%/degree C (+/- 2% Maximum over operating temp range) Protection Over Current Limit: 115 to 130%. Auto-recovery after removal of overload condition Over-Voltage Setpoint: 108 to 125% of output voltage. Unit latched 1 minute, recycle AC input to reset Short Circuit: Auto-recovery after short circuit condition is removed Over Temperature Protection: The power supply is protected for over temperature conditions with thermal shutdown. Auto-Recovery when temperature returns to normal Environmental Ambient Operating Temperature: -40º to +85ºC (75ºC baseplate maximum) Storage Temperature: -50º to +100ºC Operating Humidity: 5% to 90%, Non-condensing Storage Humidity: 5% to 95%, Non-condensing Operating Altitude: Sea-level to 15,000 ft. Shock & Vibration: Designed to meet MIL-STD-810F EMC Radiated & Conducted EMI: Designed to meet ML-STD-461F/G Cooling Conduction Cooling: Baseplate not to exceed +75ºC for full rated output Mechanical Enclosure: Metal chassis, aluminum baseplate and enclosure, non-finish Outline Dimensions: 4.25" X 8.75" X 2.2" (W X L X H) – not including I/O connector Weight: 4.5 lbs. DC Input Connector (J1): D38999 or EQ. DC Output Connector (J2): D38999 or EQ. Optional Features, Controls or Alarms Consult factory Note Product specifications subject to change without notice https://www.dscpower.com/mgdc-500-watt-military-dc-to-dc-converter daily 0.75 2026-03-16 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/d1d666a0-bf1a-49ec-a72d-7a7140ff7a10/500-watt-military-grade-DC-to-DC-Converter.jpg MGDC 500 Watt Military DC to DC Converter - MGDC500-XX-XX: 500 Watt, Military Grade, DC to DC Converter Product Specification Product Description This product is a 500 watt, single output, military grade power supply designed for electronic systems operating in demanding environments with adverse temperature conditions. This dc to dc converter is designed to meet applicable military standards for airborne, ground, vehicle, and shipboard applications. Product Features Wide Range Input: 24Vdc or 48Vdc (Nominal Input) Operating Temperature Range: -40º to +85ºC Baseplate Mounting, Conduction Cooled DC Input DC Input Range: 9 to 36Vdc (12/24/28Vdc nominal) 36 to 72Vdc (48Vdc nominal) Output Selection Guide Single Output Voltages: 12Vdc, 24Vdc, 28Vdc & 48Vdc (Custom output voltages are available, consult factory) DC Output Characteristics (floating) Output Power: 500 watts (maximum continuous power, may require derating for some low voltage outputs) Line Regulation: ±1.0% Typical Load Regulation: ±2.0% Typical (No load to full load; nominal input) Output Ripple/Noise: 1% Typical (pk-pk; nominal input; full load; 20MHz bandwidth) Set Point Accuracy: ±1.0% of Output Voltage (Nominal input; full load; 25°C) Transient Response: Output voltage returns to within 1% in less than 2.5mS for a 50% load change and the peak transient does not excess 5% Overshoot: Turn-on and turn-off overshoot should not exceed 5% over nominal voltage Electrical Characteristics Switching Frequency: 250KHz Fixed Efficiency: 90% Typical. Measured at nominal Vdc input at full load Turn On Delay: 50 to 200mS (To nominal output voltage) Isolation Voltage: Input to Output: 3000Vdc (60 seconds) Input to Chassis: >1500Vdc (60 seconds) Output to Chassis: >1500Vdc (60 seconds) Isolation Resistance: 100Mohms (Input to output) Temperature Regulation: +/- 0.005%/degree C (+/- 2% Maximum over operating temp range) Protection Over Current Limit: 115 to 130%. Auto-recovery after removal of overload condition Over-Voltage Setpoint: 108 to 125% of output voltage. Unit latched 1 minute, recycle AC input to reset Short Circuit: Auto-recovery after short circuit condition is removed Over Temperature Protection: The power supply is protected for over temperature conditions with thermal shutdown. Auto-Recovery when temperature returns to normal Environmental Ambient Operating Temperature: -40º to +85ºC (75ºC baseplate maximum) Storage Temperature: -50º to +100ºC Operating Humidity: 5% to 90%, Non-condensing Storage Humidity: 5% to 95%, Non-condensing Operating Altitude: Sea-level to 15,000 ft. Shock & Vibration: Designed to meet MIL-STD-810F EMC Radiated & Conducted EMI: Designed to meet ML-STD-461F/G Cooling Conduction Cooling: Baseplate not to exceed +75ºC for full rated output Mechanical Enclosure: Metal chassis, aluminum baseplate and enclosure, non-finish Outline Dimensions: 4.25" X 8.75" X 2.2" (W X L X H) – not including I/O connector Weight: 4.5 lbs. DC Input Connector (J1): D38999 or EQ. DC Output Connector (J2): D38999 or EQ. Optional Features, Controls or Alarms Consult factory Note Product specifications subject to change without notice https://www.dscpower.com/1000-watt-external-power-supply daily 0.75 2026-03-26 https://images.squarespace-cdn.com/content/v1/5f342ff2be67f611c452370f/35226630-8bb9-4ef1-aef5-9ea7cf237c9e/EXP1000-Series-1000-Watt-External-Power-Supply.jpg 1000 Watt External Power Supply - 1000 Watt External Power Supply Overview Application: Self-contained power supply for Industrial computer systems Project Abstract: This customer requested a power supply designed to operate outside of the enclosure containing electronics and computer boards. They wanted a minimum of 1000 watts at 48Vdc and it had to be a stand-alone unit with I/O connectors allowing standard AC line cords and pluggable output cable assemblies. This customer’s application also required that the supply meet EMC immunity requirements for Railway, Maritime and Medical usage. Additionally, it needed to meet shock and vibration under MIL-STD-810G and IEC 60068-2-27. This unit would need to be self-cooled and would have safety agency certifications applicable to their markets. Product Concept Highlights: Universal Input – IEC C16 Connector Single Output – Molex Pluggable Connector -20°C to 50°C - Ambient Temperature Range cULus & CB Scheme Certifications EMC Immunity – Railroad & Maritime MIL-STD-810G Shock & Vibration